Soldered-Load cell ampfilier-HX711-board hardware design

test-gh-syncer2·Soldered-Load-cell-ampfilier-HX711-board-hardware-design·CAD/V1.1.1/HX711.kicad_pcb

Soldered-Load cell ampfilier-HX711-board hardware design layout, top view — open source board by test-gh-syncer2

About the Soldered-Load cell ampfilier-HX711-board hardware design

Soldered-Load cell ampfilier-HX711-board hardware design is an open source PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 22 mm, with 18 components from 12 distinct parts.

Other key parts include the HX711. By type, the board carries 6 capacitors, 5 resistors, 3 relays, 1 IC and 1 transistor.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Hardware design, BOM, gerbers, 3D files and pinout for Load-cell-ampfilier-HX711-board designed by Soldered.

All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:

- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.

Main components on the Soldered-Load cell ampfilier-HX711-board hardware design

Soldered-Load cell ampfilier-HX711-board hardware design bill of materials (BOM)

18 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
HX711
U1
1
MMBT4403
Q1
2
HOLE_3.2MM
HOLE_3.2mm
H1, H2
1
HEADER_MALE_5X1
K1
1
HEADER_MALE_2X1
K2
1
HEADER_MALE_4X1
K3
4
100NF
100nF
C1, C3, C4, C5
2
10UF
10uF
C2, C6
2
100R
R1, R2
1
20K
20k
R3
1
8.2K
8.2k
R4
1
10R
R5

Soldered-Load cell ampfilier-HX711-board hardware design design files

The KiCad project lives in the test-gh-syncer2/Soldered-Load-cell-ampfilier-HX711-board-hardware-design repository on GitHub; these links point at the commit this page was built from.

Soldered-Load cell ampfilier-HX711-board hardware design: common questions

How big is the Soldered-Load cell ampfilier-HX711-board hardware design?

The Soldered-Load cell ampfilier-HX711-board hardware design measures 22 × 22 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Soldered-Load cell ampfilier-HX711-board hardware design?

18 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Soldered-Load cell ampfilier-HX711-board hardware design design files?

From the test-gh-syncer2/Soldered-Load-cell-ampfilier-HX711-board-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Soldered-Load cell ampfilier-HX711-board hardware design design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.

Similar boards