Soldered-MEMS-Microphone-SPW2430HR5H-B-breakout hardware design

test-gh-syncer2·Soldered-MEMS-Microphone-SPW2430HR5H-B-breakout-hardware-design·CAD/V1.0.0/MEMS_Microphone _SPW2430HR5H-B_breakout.kicad_pcb

Soldered-MEMS-Microphone-SPW2430HR5H-B-breakout hardware design layout, top view — open source board by test-gh-syncer2

About the Soldered-MEMS-Microphone-SPW2430HR5H-B-breakout hardware design

Soldered-MEMS-Microphone-SPW2430HR5H-B-breakout hardware design is an open source PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 22 mm, with 9 components from 7 distinct parts.

Other key parts include the SE5218. By type, the board carries 4 capacitors, 1 IC and 1 relay.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Hardware design, BOM, gerbers, 3D files and pinout for MEMS-Microphone-SPW2430HR5H-B-breakout designed by Soldered.

All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:

- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.

Main components on the Soldered-MEMS-Microphone-SPW2430HR5H-B-breakout hardware design

Soldered-MEMS-Microphone-SPW2430HR5H-B-breakout hardware design bill of materials (BOM)

9 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SE5218
U1
2
HOLE_3.2MM
HOLE_3.2mm
H1, H2
1
HEADER_MALE_5X1
K1
1
SPW2430HR5H-B
MIC1
2
0.1UF
0.1uF
C1, C2
1
10UF
10uF
C3
1
0603C
C4

Soldered-MEMS-Microphone-SPW2430HR5H-B-breakout hardware design design files

The KiCad project lives in the test-gh-syncer2/Soldered-MEMS-Microphone-SPW2430HR5H-B-breakout-hardware-design repository on GitHub; these links point at the commit this page was built from.

Soldered-MEMS-Microphone-SPW2430HR5H-B-breakout hardware design: common questions

How big is the Soldered-MEMS-Microphone-SPW2430HR5H-B-breakout hardware design?

The Soldered-MEMS-Microphone-SPW2430HR5H-B-breakout hardware design measures 22 × 22 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Soldered-MEMS-Microphone-SPW2430HR5H-B-breakout hardware design?

9 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Soldered-MEMS-Microphone-SPW2430HR5H-B-breakout hardware design design files?

From the test-gh-syncer2/Soldered-MEMS-Microphone-SPW2430HR5H-B-breakout-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Soldered-MEMS-Microphone-SPW2430HR5H-B-breakout hardware design design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.

Similar boards