Soldered-Stepper motor driver-DRV8825-board hardware design
test-gh-syncer2·Soldered-Stepper-motor-driver-DRV8825-board-hardware-design·CAD/V1.1.1/Stepper_driver_DRV8825.kicad_pcb
About the Soldered-Stepper motor driver-DRV8825-board hardware design
Soldered-Stepper motor driver-DRV8825-board hardware design is an open source PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 38 mm, with 23 components from 15 distinct parts.
Other key parts include the DRV8825. By type, the board carries 8 resistors, 6 capacitors, 2 relays, 1 IC, 1 jumper and 1 diode.
It belongs with the robotics & motion designs in this gallery.
From the project
Hardware design, BOM, gerbers, 3D files and pinout for Stepper-motor-driver-DRV8825-board designed by Soldered.
All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.
Main components on the Soldered-Stepper motor driver-DRV8825-board hardware design
Soldered-Stepper motor driver-DRV8825-board hardware design bill of materials (BOM)
23 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DRV8825 | DRV8825 | U1 |
| 4 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2, H3, H4 |
| 1 | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | JP1 |
| 2 | HEADER_MALE_8X1 | HEADER_MALE_8X1 | K1, K2 |
| 1 | purple | 0402LED | D1 |
| 1 | 12101C335K4T2A | 1210C | C1 |
| 3 | CL21B104KCFNNNE | 0805C | C2, C3, C4 |
| 1 | 08051C103KAT2A | 0805C | C5 |
| 1 | 0.47UF 0.47uF | 0603C | C6 |
| 2 | 73L2R20G | 0603R | R1, R3 |
| 1 | 1M | 0603R | R2 |
| 1 | TC33X-2-104E tc33x-2-104e | tc33x-2-103e | R4 |
| 1 | 1.5K 1.5k | 0603R | R5 |
| 2 | 10K 10k | 0603R | R6, R8 |
| 1 | 2K2 2k2 | 0402R | R7 |
Soldered-Stepper motor driver-DRV8825-board hardware design design files
The KiCad project lives in the test-gh-syncer2/Soldered-Stepper-motor-driver-DRV8825-board-hardware-design repository on GitHub; these links point at the commit this page was built from.
Soldered-Stepper motor driver-DRV8825-board hardware design: common questions
How big is the Soldered-Stepper motor driver-DRV8825-board hardware design?
The Soldered-Stepper motor driver-DRV8825-board hardware design measures 22 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soldered-Stepper motor driver-DRV8825-board hardware design?
23 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Soldered-Stepper motor driver-DRV8825-board hardware design design files?
From the test-gh-syncer2/Soldered-Stepper-motor-driver-DRV8825-board-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Soldered-Stepper motor driver-DRV8825-board hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979