19 open source boards using the DRV8825
Real designs built with the DRV8825, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
3DPCB
ChristianLerche
100 × 60 mm198 parts2LNo license9Stepper motor driver-DRV8825-board hardware design
SolderedElectronics
38 × 22 mm23 parts2LTAPR-OHL-1.07AVR/Arduino
2nd mainboard
Fiberprinter
99 × 99 mm110 parts2LNo license4STM32
Topiary-TrimBot
griffinross2
190.5 × 160 mm251 parts4LGPL-3.02DiyMEFI
mattmon
148.1 × 86.8 mm84 parts2LNo license1AVR/Arduino
Eaf
jrhuerta
42.5 × 43.5 mm6 parts2LNo license1ESP32
MR SLDR
MikolajMarkiel
89.3 × 68 mm135 parts2LMIT0AVR/Arduino
Stepper motor controller
abdallah-yasser
60 × 47 mm63 parts4LMIT0AVR/Arduino
CAXX-Motor-Driver-PCB
Mohammed-Emad-2004
60 × 60.5 mm61 parts4LNo license0Soldered-Stepper motor driver-DRV8825-board hardware design
test-gh-syncer2
22 × 38 mm23 parts2LTAPR-OHL-1.00Soldered-Stepper-Motor-Driver-DRV8825-Board hardware design
SolderedElectronics
38 × 22 mm19 parts2LNo license0AVR/Arduino
Opensyringepump indus
PySpice-org
149.2 × 108 mm152 parts4LNo license9DRV8825
QUT-EESS
28 × 16.5 mm18 parts2LGPL-3.00ESP8266
Circuit final design
ambadran
90.9 × 52.4 mm21 parts2LNo license0RP2040/RP2350
V2
ambadran
91.9 × 55.6 mm18 parts2LNo license0Stepper driver DRV8825
humancomputerintegration
48.5 × 33 mm23 parts2LGPL-3.03NXP
Carte Principale
AREA-Amiens
80 × 65 mm44 partsNo license0Stepper driver DRV8825
Human-Computer-Integration-Lab
48.5 × 33 mm23 parts2LNo license0NXP
Carte Principale
PCBrs
80 × 65 mm44 partsNo license0
How designs wire the DRV8825
Read from the KiCad layouts of 19 open source designs, one per repository: what each pin of the DRV8825 connects to, and the resistors, capacitors and other passives placed on it.
- The CP2 pin has a series capacitor on 12 of 17 designs, most often 10 nF (then 100 nF).
- The ISENB pin has a resistor to GND on 12 of 17 designs, most often 100 mΩ (then 220 mΩ).
- The CP1 pin has a series capacitor on 11 of 17 designs, most often 10 nF (then 100 nF).
- The ISENA pin has a resistor to GND on 11 of 17 designs, most often 100 mΩ (then 220 mΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CP1pin 1 | Connected to: Signal 76% · GND 24% |
|
| CP2pin 2 | Connected to: Signal 76% · not connected 24% |
|
| VCPpin 3 | Connected to: A connector 24% |
|
| VMApin 4 | Connected to: A connector 24% · 12V 35% |
|
| ISENApin 6 | Connected to: A connector 24% |
|
| ISENBpin 9 | Connected to: Signal 88% |
|
| VMBpin 11 | Connected to: Signal 59% · 12V 35% |
|
| AVREFpin 12 | Connected to: Signal 82% |
|
| BVREFpin 13 | Connected to: Signal 82% · VREF1 18% |
|
| GNDpin 14, 28 | Connected to: GND 76% | — |
| V3P3OUTpin 15 | Connected to: 3.3V 47% · a signal 47% |
|
| NRESETpin 16 | Connected to: The microcontroller 41% · 3.3V 18% |
|
| NSLEEPpin 17 | Connected to: The microcontroller 25% · 3.3V 25% |
|
| NFAULTpin 18 | Connected to: The microcontroller 25% · not connected 17% |
|
| DECAYpin 19 | Connected to: Not connected 75% · GND 17% | — |
| NCpin 23 | Connected to: Not connected 92% | — |
| NHOMEpin 27 | Connected to: Not connected 100% | — |
| TPpin 29 | Connected to: GND 90% | — |
10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 3DPCB by ChristianLerche, Opensyringepump indus by PySpice-org, Stepper motor driver-DRV8825-board hardware design by SolderedElectronics and 2nd mainboard pcb by Fiberprinter.
The DRV8825 in open source designs
The gallery holds 19 open source boards using the DRV8825 from 18 GitHub repositories; a typical one measures about 80 × 55.6 mm and carries around 44 components.
76% are two-layer designs, the rest use four layers or more, and 37% carry an open source license.
The most starred is 3DPCB by ChristianLerche.
Parts used alongside the DRV8825
Microcontrollers on boards using the DRV8825
What boards using the DRV8825 are built for
DRV8825: common questions
Where can I find a DRV8825 reference design?
Each of the 19 boards on this page is a real design using the DRV8825. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the DRV8825 CP2 pin connected?
The CP2 pin has a series capacitor on 12 of 17 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 19 open source designs using the DRV8825.
What resistor goes on the DRV8825 ISENB pin?
The ISENB pin has a resistor to GND on 12 of 17 designs, most often 100 mΩ (then 220 mΩ). Counted from the KiCad layouts of 19 open source designs using the DRV8825.
How is the DRV8825 CP1 pin connected?
The CP1 pin has a series capacitor on 11 of 17 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 19 open source designs using the DRV8825.
What parts are used alongside the DRV8825?
The ATmega328P-A, CH340G, CONDO2-5, SN65HVD232D and TEENSY_3.5_3.6_BASIC appear in the most repositories here.
Which microcontrollers do boards using the DRV8825 use?
Most are built on AVR/Arduino (5), NXP (3), ESP32 (1) and ESP8266 (1).
How big is a typical board using the DRV8825?
The median is 80 × 55.6 mm, and 76% are two-layer designs.
What is the most popular open source board using the DRV8825?
By GitHub stars, 3DPCB by ChristianLerche, with 9 stars.
Can I simulate one of these boards using the DRV8825 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.