Soldered-Ultrasonic easyC-adapter hardware design

test-gh-syncer2·Soldered-Ultrasonic-easyC-adapter-hardware-design·CAD/V1.1.1/easyC_ultrasonic_adapter.kicad_pcb

Soldered-Ultrasonic easyC-adapter hardware design PCB layout, top view — open source AVR/Arduino board by test-gh-syncer2

About the Soldered-Ultrasonic easyC-adapter hardware design PCB

Soldered-Ultrasonic easyC-adapter hardware design is an open source AVR/Arduino PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 22 × 38 mm, with 18 components from 12 distinct parts.

Its main chip is the ATTINY404-SSNR, from the AVR/Arduino family. Other key parts include the TPS613222A. By type, the board carries 5 relays, 4 capacitors, 2 ICs, 2 resistors and 1 inductor.

It belongs with the sensors designs in this gallery.

From the project

Hardware design, BOM, gerbers, 3D files and pinout for Ultrasonic-easyC-adapter designed by Soldered.

All Soldered hardware is designed in KiCAD, and repositories are organized in the following way:

- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organized by version. Change log lists all changes between versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organized by version.

Main components on the Soldered-Ultrasonic easyC-adapter hardware design

Soldered-Ultrasonic easyC-adapter hardware design bill of materials (BOM)

18 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATTINY404-SSNR
U1
1
TPS613222A
U2
4
HOLE_3.2MM
HOLE_3.2mm
H1, H2, H3, H4
1
HEADER_MALE_4X1
K1
2
easyC-SMD
K2, K4
1
HEADER-UPDI
K3
1
DSHP03TS-S
K5
1
DFE201612E-2R2M=P2
L1
1
0.1UF
0.1uF
C1
2
CL10A226MPCNUBE
C2, C3
1
C1608X7S1A475K080AC
C4
2
10K
10k
R1, R2

Soldered-Ultrasonic easyC-adapter hardware design design files

The KiCad project lives in the test-gh-syncer2/Soldered-Ultrasonic-easyC-adapter-hardware-design repository on GitHub; these links point at the commit this page was built from.

Soldered-Ultrasonic easyC-adapter hardware design: common questions

What microcontroller does the Soldered-Ultrasonic easyC-adapter hardware design use?

The Soldered-Ultrasonic easyC-adapter hardware design is built around the ATTINY404-SSNR, from the AVR/Arduino family.

How big is the Soldered-Ultrasonic easyC-adapter hardware design PCB?

The Soldered-Ultrasonic easyC-adapter hardware design measures 22 × 38 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Soldered-Ultrasonic easyC-adapter hardware design?

18 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Soldered-Ultrasonic easyC-adapter hardware design design files?

From the test-gh-syncer2/Soldered-Ultrasonic-easyC-adapter-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Soldered-Ultrasonic easyC-adapter hardware design design in my own project?

Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.

Can I test firmware for the Soldered-Ultrasonic easyC-adapter hardware design without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards