Mynd USB JACK
About the Mynd USB JACK PCB
Mynd USB JACK is an open source PCB design by teufelaudio, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 23 × 20.8 mm, with 38 components from 17 distinct parts.
By type, the board carries 10 capacitors, 8 test points, 6 resistors, 2 connectors and 2 inductors.
It belongs with the audio designs in this gallery.
From the project
Hardware design files for the Mynd audio speaker, including CAD models, schematics.
Mynd USB JACK bill of materials (BOM)
38 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NG-HC-0412 | USB_TYPE_C_HC_0768 | J1J |
| 1 | WB200AW-10 | WB200AW_2x5P | P1J |
| 1 | SMF26AL | SOD-123FL | ESD1J |
| 6 | CESD0501CU | DFN2_100X60X50_65 | ESD2J, ESD3J, ESD4J, ESD5J, ESD6J, ESD7J |
| 8 | TP12 | TP120 | TP1J, TP2J, TP3J, TP4J, TP5J, TP6J, TP9J, TP10J |
| 1 | 3.2 | Teufel_ASM_Rev | Teufel_ASM_Label1J |
| 1 | 2023 | TEUFEL_COPYRIGHT | Teufel_Copyright1K |
| 1 | 3.2 | Teufel_PCB_Rev | Teufel_PCB_Label1J |
| 1 | CET2012A-900S 90R | CET2012D | L1J |
| 1 | CET706038-701T02 700R | DU_IND_SMD_SCM7060 | L2J |
| 1 | Generic 2.2uF | C0805_145 | C1J |
| 3 | Generic 100nF | C0603X100 | C2J, C8J, C10J |
| 2 | Generic 10nF | C0603X100 | C3J, C4J |
| 2 | Generic 470pF | C0603X80 | C5J, C6J |
| 2 | Generic 1nF | C0603X100 | C7J, C9J |
| 4 | Generic 0R | R0402 | R1J, R2J, R3J, R4J |
| 2 | Generic NC | R0402 | R5J, R6J |
Mynd USB JACK design files
The KiCad project lives in the teufelaudio/mynd-hardware repository on GitHub; these links point at the commit this page was built from.
Mynd USB JACK: common questions
How big is the Mynd USB JACK PCB?
The Mynd USB JACK measures 23 × 20.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mynd USB JACK?
38 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mynd USB JACK design files?
From the teufelaudio/mynd-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Mynd USB JACK design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which teufelaudio chose for the repository.
More boards in mynd-hardware
STM32Mynd Main
75 × 136 mm560 parts4LCC-BY-SA-4.076
Mynd AMP
90.5 × 57.5 mm158 parts2LCC-BY-SA-4.076
Mynd BT
55 × 41 mm135 parts4LCC-BY-SA-4.076
Mynd UI
116 × 26 mm81 parts2LCC-BY-SA-4.076
MYNDberry
83.8 × 45.7 mm20 parts2LCC-BY-SA-4.076
Mynd LINE IN Jack
24.1 × 16.5 mm18 parts2LCC-BY-SA-4.076
Mynd Baffle
45 × 30 mm17 parts2LCC-BY-SA-4.076
Mynd Conn
27 × 54 mm15 parts2LCC-BY-SA-4.076
Mynd Batt
41 × 21 mm14 parts2LCC-BY-SA-4.076
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687