Keypad

tharejarehan0-a11y·Keypad·Kicad/mech_Keyboard.kicad_pcb

Keypad PCB layout, top view — open source RP2040/RP2350 board by tharejarehan0-a11y

About the Keypad PCB

Keypad is an open source RP2040/RP2350 PCB design by tharejarehan0-a11y, published on GitHub. It is a 2-layer board measuring 252.4 × 81 mm, with 63 components from 7 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 30 switches, 29 diodes, 3 capacitors and 1 module.

It belongs with the keyboards designs in this gallery.

From the project

It is Keypad a keyboard designed specifically to make learning touch typing efficient and more easy for beginners

1. Best for people starting touch typing 2. More portable if only learning to type 3. Mechanical keyboard with MX Cherry Keys 4. Can be customized using the firmware unlike ordinary keyboards

These keys are layed in a matrix of rows and columns. There are 10 columns and 4 rows in the matrix. All the intersection of the rows and columns constitute a key here. The microconttroller that will be attached to these will detect low currect at the key you will press and will have already the columns and rows assigned in the firmware that let it know where the key to detect is. I have attached global…

Keypad, from the project README
From the project README

Main components on the Keypad

Keypad bill of materials (BOM)

63 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi_Pico
A1
28
~
S3, S4, S5, S6, S7, S11, S12, S13 +20
1
~
S56
1
SW_Push
SW1
29
~
D3, D4, D5, D6, D7, D11, D12, D13 +21
2
100nF
C1, C3
1
10µF
C2

Keypad design files

The KiCad project lives in the tharejarehan0-a11y/Keypad repository on GitHub; these links point at the commit this page was built from.

Keypad: common questions

What microcontroller does the Keypad use?

The Keypad is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Keypad PCB?

The Keypad measures 252.4 × 81 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Keypad?

63 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Keypad design files?

From the tharejarehan0-a11y/Keypad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Keypad design in my own project?

The repository has no license, so all rights stay with tharejarehan0-a11y. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Keypad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards