MyMacropad

TheBanias·MyMacropad·PCB/MACROPAD.kicad_pcb

MyMacropad PCB layout, top view — open source RP2040/RP2350 board by TheBanias

About the MyMacropad PCB

MyMacropad is an open source RP2040/RP2350 PCB design by TheBanias, published on GitHub. It is a 2-layer board measuring 58.8 × 61.4 mm, with 9 components from 3 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 6 switches, 2 diodes and 1 IC.

It belongs with the keyboards designs in this gallery.

From the project

A 6–key macropad based on a Seeed Studio XIAO RP2040, designed for quick shortcuts on Windows 10: open a new browser tab, take screenshots, and launch Steam and Discord.

A 6–key macropad based on a Seeed Studio XIAO RP2040, designed for quick shortcuts on Windows 10: open a new browser tab, take screenshots, and launch Steam and Discord.

Screenshot of the complete hackpad (assembled):

This is the electrical schematic used to wire the XIAO RP2040, switches and connectors:

Top view of the custom PCB designed in KiCad:

The macropad case is split into two main parts: a base and a top cover. They are provided as STEP files so they can be edited or re‑exported as STLs for 3D printing.

MyMacropad, from the project README
From the project README

Main components on the MyMacropad

MyMacropad bill of materials (BOM)

9 components, 3 distinct parts.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
6
SW_Push
SW1, SW2, SW3, SW4, SW5, SW6
2
SK6812MINI
D1, D2

MyMacropad design files

The KiCad project lives in the TheBanias/MyMacropad repository on GitHub; these links point at the commit this page was built from.

MyMacropad: common questions

What microcontroller does the MyMacropad use?

The MyMacropad is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the MyMacropad PCB?

The MyMacropad measures 58.8 × 61.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MyMacropad?

9 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the MyMacropad design files?

From the TheBanias/MyMacropad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MyMacropad design in my own project?

The repository has no license, so all rights stay with TheBanias. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MyMacropad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards