LPA-FW

TheEngineeringOctopus·LPA-FW·CAD Files/Circuit Board/KiCAD Files/lpa.kicad_pcb

LPA-FW PCB layout, top view — open source AVR/Arduino board by TheEngineeringOctopus

About the LPA-FW PCB

LPA-FW is an open source AVR/Arduino PCB design by TheEngineeringOctopus, published on GitHub. It is a 2-layer board measuring 143 × 74 mm, with 81 components from 19 distinct parts.

Its main chip is the ATMEGA328-A, from the AVR/Arduino family. Other key parts include the SD_CARD, AP1509 and TLC5941. By type, the board carries 49 diodes, 10 capacitors, 6 ICs, 5 resistors, 2 connectors and 1 crystal.

From the project

Main files ---------- - lpa.pro : KiCAD project - lpa.sch : Main schematic diagram - tlcs1-3.sch: LED driver schematic diagram - lpa.kicadpcb : PCB layout diagram

Main files ---------- - lpa.pro : KiCAD project - lpa.sch : Main schematic diagram - tlcs1-3.sch: LED driver schematic diagram - lpa.kicadpcb : PCB layout diagram

Libraries --------- - libraries : folder with schematic diagram part libraries - LPA_parts.pretty: folder with PCB layout diagram part libraries - fp-lib-table: file listing the PCB layout diagram part libraries used by this project - lpa-cache.lib: Part library cache, from which parts can be loaded if not found in the standard libraries.

Main components on the LPA-FW

LPA-FW bill of materials (BOM)

81 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATMEGA328-A
Atmel
IC1
1
SD_CARD
Amphenol Commercial Products
U1
1
AP1509
Diodes Incorporated
U2
3
TLC5941
Texas Instruments
U3, U4, U5
1
CRYSTAL_SMD
CTS-Frequency Controls
X1
1
BARREL_JACK
Kycon
CON1
1
CONN_3X2
TE Connectivity AMP Connectors
P2
3
LED
OSRAM Opto Semiconductors Inc.
ERR1, FIN1, ON1
1
SW_PUSH
C&K Components
RESET1
3
330
R_ERR1, R_FIN1, R_ON1
48
LED
D1, D2, D3, D4, D5, D6, D7, D8 +40
1
D_Schottky
ON Semiconductor
D49
1
150uH
TDK Corporation
L1
6
0.1 uF
Samsung Electro-Mechanics America, Inc.
C1, C2, C6, C7, C8, C11
1
100uF
Nichicon
C3
1
470uF
Nichicon
C5
2
12pF
AVX
C9, C10
2
10K
Panasonic Electronic Components
R1, R2
3
2.2K
Susumu
R3, R4, R5

LPA-FW design files

The KiCad project lives in the TheEngineeringOctopus/LPA-FW repository on GitHub; these links point at the commit this page was built from.

LPA-FW: common questions

What microcontroller does the LPA-FW use?

The LPA-FW is built around the ATMEGA328-A, from the AVR/Arduino family.

How big is the LPA-FW PCB?

The LPA-FW measures 143 × 74 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the LPA-FW?

81 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the LPA-FW design files?

From the TheEngineeringOctopus/LPA-FW repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the LPA-FW design in my own project?

The repository has no license, so all rights stay with TheEngineeringOctopus. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the LPA-FW without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

Similar boards