TP DSI
thejbte·TP_DSI
About the TP DSI PCB
TP DSI is an open source PIC PCB design by thejbte, published on GitHub. It is a 2-layer board measuring 85 × 62.5 mm, with 55 components from 30 distinct parts.
Its main chip is the PIC16F1939-IPT, from the PIC family. Other key parts include the 74LS47, MC7805_TO252-3(DPACK), TLV2217_TO252-3 and DA56-11GWA. By type, the board carries 22 resistors, 8 capacitors, 7 connectors, 6 diodes, 5 ICs and 2 transistors.
From the project
Trabajo practico DSI CESE
Main components on the TP DSI
TP DSI bill of materials (BOM)
55 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS47 | DIP-16_W7.62mm | U1 |
| 1 | PIC16F1939-IPT | TQFP-44_10x10mm_P0.8mm | U2 |
| 1 | MC7805_TO252-3(DPACK) | TO-252-2 | U3 |
| 1 | TLV2217_TO252-3 | TO-252-2 | U4 |
| 1 | DA56-11GWA | DA56-11CGKWA | U5 |
| 2 | Q_NPN_BCE | SOT-23 | Q1, Q2 |
| 1 | Crystal | Crystal_HC18-U_Vertical | Y1 |
| 2 | Conn_01x02_Male | PinSocket_1x02_P2.54mm_Vertical | J1, J2 |
| 1 | Conn_01x10_Male | PinSocket_1x10_P2.54mm_Vertical | J3 |
| 2 | Conn_01x04_Male | PinSocket_1x04_P2.54mm_Vertical | J4, J5 |
| 1 | Conn_01x06_Male | PinSocket_1x06_P2.54mm_Vertical | J6 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_bornier-2_P5.08mm | J7 |
| 1 | Jumper_NC_Dual | PinSocket_1x03_P2.54mm_Vertical | JP1 |
| 1 | 10K | Potentiometer_ACP_CA6-VSMD_Vertical | RV1 |
| 2 | SW_Push | SW_PUSH_6mm_H5mm | SW1, SW2 |
| 1 | 1n4148 | D_SOD-123 | D1 |
| 2 | LED | LED_0603_1608Metric_Castellated | D2, D4 |
| 1 | D_TVS_DESD5V0S1BA-7DITR-ND | D_SOD-123 | D3 |
| 1 | LED_CRGB | LED_RGB_1210 | D5 |
| 1 | D_TVS_3V3 | D_SOD-123 | D6 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1uF | CP_EIA-3528-21_Kemet-B | C1, C3 |
| 1 | 22uF | CP_EIA-7343-20_Kemet-V | C2 |
| 1 | 10uF | CP_EIA-7343-20_Kemet-V | C4 |
| 2 | 22pF | C_0603_1608Metric | C5, C6 |
| 2 | 0.1uF | C_0603_1608Metric | C7, C8 |
| 11 | 330 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3, R4, R12, R15, R16, R17 +3 |
| 3 | 1K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5, R13, R22 |
| 2 | 470 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6, R7 |
| 4 | 10K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R8, R10, R14, R23 |
| 2 | DNP-10K | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R9, R11 |
TP DSI design files
The KiCad project lives in the thejbte/TP_DSI repository on GitHub; these links point at the commit this page was built from.
- LayoutTPDSI_1.kicad_pcb
TP DSI: common questions
What microcontroller does the TP DSI use?
The TP DSI is built around the PIC16F1939-IPT, from the PIC family.
How big is the TP DSI PCB?
The TP DSI measures 85 × 62.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TP DSI?
55 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the TP DSI design files?
From the thejbte/TP_DSI repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the TP DSI design in my own project?
The repository has no license, so all rights stay with thejbte. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the TP DSI without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379