19 open source boards using the 74LS47

Real designs built with the 74LS47, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

19 boardsClear filters|Most starred

How designs wire the 74LS47

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the 74LS47 connects to, and the resistors, capacitors and other passives placed on it.

  • The B pins have a series resistor on 11 of 14 designs, most often 1 kΩ (then 330 Ω).
  • The C pins have a series resistor on 11 of 14 designs, most often 1 kΩ (then 330 Ω).
  • The D pins have a series resistor on 11 of 14 designs, most often 1 kΩ (then 330 Ω).
  • The A pins have a series resistor on 11 of 14 designs, most often 1 kΩ (then 330 Ω).
Bpin 1, 12Connected to: Signal 100%
  • Series resistor on 79% · 1 kΩ (2), 330 Ω (2), 560 Ω (1)
Cpin 2, 11Connected to: Signal 100%
  • Series resistor on 79% · 1 kΩ (2), 330 Ω (2), 560 Ω (1)
Dpin 6, 10Connected to: Signal 96%
  • Series resistor on 79% · 1 kΩ (2), 330 Ω (2), 560 Ω (1)
Apin 7, 13Connected to: Signal 100%
  • Series resistor on 79% · 1 kΩ (2), 330 Ω (2), 560 Ω (1)
GNDpin 8Connected to: GND 93%
Epin 9Connected to: Signal 93%
  • Series resistor on 71% · 1 kΩ (2), 560 Ω (1), 330 Ω (1)
Gpin 14Connected to: Signal 100%
  • Series resistor on 79% · 1 kΩ (2), 330 Ω (2), 560 Ω (1)
Fpin 15Connected to: Signal 100%
  • Series resistor on 79% · 1 kΩ (2), 330 Ω (2), 560 Ω (1)
VCCpin 16Connected to: 5V 93%

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include HEC-Model-Z1 by Andy18650, Ttl clock by skiselev, ISA POST Card v5 by ausandavno and F103 V2 by Vaaarad07.

The 74LS47 in open source designs

The gallery holds 19 open source boards using the 74LS47 from 16 GitHub repositories; a typical one measures about 127.1 × 85.3 mm and carries around 55 components.

89% are two-layer designs, the rest use four layers or more, and 26% carry an open source license.

The most starred is HEC-Model-Z1 by Andy18650.

Microcontrollers on boards using the 74LS47

74LS47: common questions

Where can I find a 74LS47 reference design?

Each of the 19 boards on this page is a real design using the 74LS47. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the 74LS47 B pin?

The B pins have a series resistor on 11 of 14 designs, most often 1 kΩ (then 330 Ω). Counted from the KiCad layouts of 14 open source designs using the 74LS47.

What resistor goes on the 74LS47 C pin?

The C pins have a series resistor on 11 of 14 designs, most often 1 kΩ (then 330 Ω). Counted from the KiCad layouts of 14 open source designs using the 74LS47.

What resistor goes on the 74LS47 D pin?

The D pins have a series resistor on 11 of 14 designs, most often 1 kΩ (then 330 Ω). Counted from the KiCad layouts of 14 open source designs using the 74LS47.

What parts are used alongside the 74LS47?

The 74LS04, 74LS08, 74LS32, 74LS74 and 74LS00 appear in the most repositories here.

Which microcontrollers do boards using the 74LS47 use?

Most are built on STM32 (2), AVR/Arduino (1) and PIC (1).

How big is a typical board using the 74LS47?

The median is 127.1 × 85.3 mm, and 89% are two-layer designs.

What is the most popular open source board using the 74LS47?

By GitHub stars, HEC-Model-Z1 by Andy18650, with 36 stars.

Can I simulate one of these boards using the 74LS47 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part