35 open source boards using the 74LS193
Real designs built with the 74LS193, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
C64 Motherboard KU-14194HB
baldengineer
390.2 × 180.3 mm220 parts2LCC-BY-4.0442C64-250407-Replica
bwack
390 × 179.8 mm214 parts2LCERN-OHL-1.2116KU-14194HB-RevB
bwack
390.2 × 180.3 mm221 parts2LNo license67Z80-cmos nmos tester
djtersteegc
81.3 × 86.4 mm38 parts2LMIT61Fennec6800
ChartreuseK
218 × 131.9 mm113 parts2LBSD-3-Clause20AVG Discrete
nmikstas
121.9 × 91.4 mm36 parts2LNo license14Main
ceteras
299.2 × 180 mm352 parts2LMIT11SAP-Plus Memory Loader
TomNisbet
150 × 100 mm57 parts2LMIT10Apollo 7 Squale
jfdelnero
450 × 160 mm219 parts2LNo license6AVR/Arduino
MZ-1500 SD
yanataka60
114.8 × 104.4 mm33 parts2LMIT6Main
ceteras
299.2 × 180 mm434 parts2LMIT5Northstar HD-5
abzman
190.6 × 172.4 mm154 parts2LUnlicense4Tom-1
tcr
127 × 127 mm83 parts4LNo license3Showcase
draklowell
100 × 99.5 mm47 parts2LGPL-3.03Latest-Full-Backplane
Trilobyte-CPU
100 × 100 mm146 parts4LNo license2Z80-cmos nmos tester
Vakon84
81.3 × 86.4 mm38 parts2LMIT2DigitalTimer
Bican-Valeriu-Cristian
82 × 84 mm35 parts2LMIT1AVR/Arduino
8bit
Haxintosh
214.7 × 238.3 mm468 parts2LCERN-OHL-P-2.00Compact64
mariella-dejong
390 × 179.8 mm234 parts2LCERN-OHL-S-2.00Dino v0 0 2
robertrico
298.9 × 222.8 mm179 parts4LNo license02K-BWS
felge1966
170.2 × 94 mm48 parts2LAGPL-3.00DigitalTimer
CurcanRazvan
82 × 84 mm34 parts2LNo license0SAP-Plus Program Counter and Stack Pointer
TomNisbet
102 × 96 mm50 parts2LMIT10AVG Discrete
Mazamars312
121.9 × 91.4 mm36 parts2LNo license6Clu
rcapaverde
160.7 × 210 mm124 parts2LNo license0Fdc01
felge1966
170.2 × 96.5 mm40 parts2LAGPL-3.00S16rf
rcapaverde
297 × 125 mm105 parts2LNo license0GDC01
felge1966
170.2 × 96.5 mm36 parts2LAGPL-3.00AddressRegisterModule
crempp
100 × 80 mm61 parts2LNo license4Clua
rcapaverde
160.7 × 210 mm86 parts2LNo license0Interface
draklowell
100 × 99.4 mm17 parts2LGPL-3.03Reg
TheJustMoose
71.1 × 42.6 mm38 parts2LNo license2M16rfa
rcapaverde
209.6 × 125.1 mm58 parts2LNo license0M16rf
rcapaverde
209.6 × 125.1 mm55 parts2LNo license0Ex16a
rcapaverde
125.7 × 79 mm43 parts2LNo license0
How designs wire the 74LS193
Read from the KiCad layouts of 26 open source designs, one per repository: what each pin of the 74LS193 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 17 of 26 designs, most often 100 nF (then 47 nF).
- The BO pin is left unconnected on 19 of 26 designs (a signal on 7).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 8 | Connected to: GND 100% | — |
| BOpin 13 | Connected to: Not connected 73% · a signal 27% | — |
| VCCpin 16 | Connected to: 5V 100% |
|
13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include C64 Motherboard KU-14194HB by baldengineer, C64-250407-Replica-KiCad by bwack, KU-14194HB-RevB-KiCad by bwack and Z80-cmos nmos tester by djtersteegc.
The 74LS193 in open source designs
The gallery holds 35 open source boards using the 74LS193 from 26 GitHub repositories; a typical one measures about 160.7 × 104.4 mm and carries around 58 components.
91% are two-layer designs, the rest use four layers or more, and 54% carry an open source license.
The most starred is C64 Motherboard KU-14194HB by baldengineer.
Parts used alongside the 74LS193
Microcontrollers on boards using the 74LS193
What boards using the 74LS193 are built for
74LS193: common questions
Where can I find a 74LS193 reference design?
Each of the 35 boards on this page is a real design using the 74LS193. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LS193 VCC pin?
The VCC pin has a decoupling capacitor on 17 of 26 designs, most often 100 nF (then 47 nF). Counted from the KiCad layouts of 26 open source designs using the 74LS193.
How is the 74LS193 BO pin connected?
The BO pin is left unconnected on 19 of 26 designs (a signal on 7). Counted from the KiCad layouts of 26 open source designs using the 74LS193.
What parts are used alongside the 74LS193?
The 74LS74, 74LS04, 74LS00, 74LS02 and 74LS08 appear in the most repositories here.
Which microcontrollers do boards using the 74LS193 use?
Most are built on AVR/Arduino (2).
How big is a typical board using the 74LS193?
The median is 160.7 × 104.4 mm, and 91% are two-layer designs.
What is the most popular open source board using the 74LS193?
By GitHub stars, C64 Motherboard KU-14194HB by baldengineer, with 442 stars.
Can I simulate one of these boards using the 74LS193 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.