28 open source boards using the 74LS27
Real designs built with the 74LS27, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
68000
jefftranter
134.6 × 208.3 mm90 parts2LNo license132ZX Interface 2021
tebl
87.6 × 100 mm56 parts2LCERN-OHL-1.232Plusd
alvaroalea
99.1 × 99.1 mm58 parts2LNo license24Commodore-Plus4
StormTrooper
284.7 × 158.9 mm212 parts2LNo license20Junior interface
laurent-fr
217.2 × 113 mm116 parts2LCC-BY-NC-4.014Vhd if c9d
popolonx
145 × 120 mm72 parts2LNo license7Memotron
inmbolmie
104.9 × 81.8 mm44 parts2LGPL-3.04Zx talkman
zxinfo-diy-electronics
75.9 × 66 mm33 parts2LNo license4TicTacToe---Using-Digital-Logic
rougeDAG
156 × 133.5 mm139 parts2LNo license1- schematic only · 164 parts
Xl-7-repro
computerguy096
164 partsGPL-3.00 - schematic only · 13 parts
8x8 memory cell rtl
TIShoueb
13 partsNo license0 Commodore Plus 4
baldengineer
284.7 × 158.9 mm212 parts2LCC-BY-4.0442Plusd no route
alvaroalea
106.7 × 83.8 mm47 parts2LNo license24ALU0
Left-Hand
100 × 100 mm66 parts2LNo license19CPC464-2MINIDDI
Board-Folk
93.4 × 80.2 mm59 parts2LNo license10Cs2
na103
48 × 25 mm6 parts2LCC-BY-NC-4.04P2000t joystick slot2
ifilot
33.4 × 0 mm26 parts2LNo license1Board
CatspersCoffee
254 × 134.6 mm163 partsCustom license0Situacion1
alvaroalea
188 × 153.7 mm45 parts2LNo license24ZX81 Centronics
BrettHallen
68.8 × 82.6 mm18 parts2LNo license5Junior universal memory
laurent-fr
160 × 100 mm38 parts2LCC-BY-NC-4.014Reg
TheJustMoose
71.1 × 42.6 mm38 parts2LNo license2RC1 Real Time Clock
tebl
99.1 × 59.7 mm28 parts2LCERN-OHL-1.225GIMIX Ghost 6800
roberto314
228.6 × 142.2 mm74 parts2LBSD-2-Clause1ACE-COLOUR2
flypie
165.1 × 114.3 mm95 parts2LGPL-3.013SAP-Plus ALU
TomNisbet
102 × 96 mm35 parts2LMIT10AVR/Arduino
Z80DMA2
lynchaj
100 × 100 mm59 parts2LNo license31SAP-Plus System Clock
TomNisbet
102 × 96 mm32 parts2LMIT10
How designs wire the 74LS27
Read from the KiCad layouts of 21 open source designs, one per repository: what each pin of the 74LS27 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 10 of 21 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 7 | Connected to: GND 90% | — |
| VCCpin 14 | Connected to: 5V 90% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Commodore Plus 4 by baldengineer, 68000 by jefftranter, ZX Interface 2021 by tebl and Z80DMA2 by lynchaj.
The 74LS27 in open source designs
The gallery holds 28 open source boards using the 74LS27 from 24 GitHub repositories; a typical one measures about 103.5 × 100 mm and carries around 57 components.
100% are two-layer designs, the rest use four layers or more, and 32% carry an open source license.
The most starred is Commodore Plus 4 by baldengineer.
Parts used alongside the 74LS27
Microcontrollers on boards using the 74LS27
What boards using the 74LS27 are built for
74LS27: common questions
Where can I find a 74LS27 reference design?
Each of the 28 boards on this page is a real design using the 74LS27. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LS27 VCC pin?
The VCC pin has a decoupling capacitor on 10 of 21 designs, most often 100 nF. Counted from the KiCad layouts of 21 open source designs using the 74LS27.
What parts are used alongside the 74LS27?
The 74LS04, 74LS74, 74LS32, 74LS00 and 74LS02 appear in the most repositories here.
Which microcontrollers do boards using the 74LS27 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the 74LS27?
The median is 103.5 × 100 mm, and 100% are two-layer designs.
What is the most popular open source board using the 74LS27?
By GitHub stars, Commodore Plus 4 by baldengineer, with 442 stars.
Can I simulate one of these boards using the 74LS27 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.