Solar-Charger
Theo824·Solar-Charger·solarChargerPCB/solarCharger.kicad_pcb
About the Solar-Charger PCB
Solar-Charger is an open source PCB design by Theo824, published on GitHub. It is a 2-layer board measuring 198.1 × 40.6 mm, with 42 components from 17 distinct parts.
Other key parts include the LM2596T-3.3. By type, the board carries 13 connectors, 9 diodes, 4 capacitors, 3 ICs, 3 resistors and 2 transistors.
It belongs with the power & battery designs in this gallery.
From the project
I designed and built a solar panel-powered constant-current charger for NiMH or NiCD batteries, or an iPhone, which can function as a power bank or be used in other devices.
Designed and built a solar panel-powered constant-current charger for NiMH or NiCD batteries, or an iPhone, which can function as a power bank or be used in other devices.
The voltages are adjustable to accommodate any battery, and the solar panels are detachable through screw connectors.
Conceived the design concept centred around only two transistors. Researched the iPhone charging handshake protocol, modified the circuit in NI Multisim to correct functionality, and integrated it onto a 2-layer PCB using KiCad.
Main components on the Solar-Charger
Solar-Charger bill of materials (BOM)
42 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LM2596T-3.3 | TO-220-5_P3.4x3.7mm_StaggerOdd_Lead3.8mm_Vertical | U1, U2 |
| 1 | ~ | USB_C_module | U3 |
| 2 | BC337 | TO-92_Inline | Q1, Q2 |
| 8 | Screw_Terminal_01x02 | 2_54mm_Pitch_Mount_Screw_Terminal_Connector | J1, J2, J3, J5, J6, J7, J8, J14 |
| 5 | Conn_01x01_Pin | PinHeader_1x01_P2.54mm_Vertical | J4, J9, J10, J12, J13 |
| 4 | R_Potentiometer | Potentiometer_Bourns_3296W_Vertical | RV1, RV2, RV5, RV6 |
| 1 | SW_SPST | Toggle_SPST | SW1 |
| 1 | SW_DPDT_x2 | Toggle_DPDT | SW2 |
| 1 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 7 | 1N5822 | D_DO-201AD_P15.24mm_Horizontal | D3, D4, D5, D6, D7, D8, D9 |
| 1 | 6V8 | D_DO-41_SOD81_P12.70mm_Horizontal | D11 |
| 2 | 33u | inductor_L6mm_D2_3mm_W28mm | L1, L3 |
| 2 | 220u | CP_Radial_D10.0mm_P5.00mm | C1, C3 |
| 2 | 100u | CP_Radial_D8.0mm_P3.50mm | C2, C5 |
| 1 | 8k2 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 68R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 5k6 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
Solar-Charger design files
The KiCad project lives in the Theo824/Solar-Charger repository on GitHub; these links point at the commit this page was built from.
Solar-Charger: common questions
How big is the Solar-Charger PCB?
The Solar-Charger measures 198.1 × 40.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Solar-Charger?
42 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Solar-Charger design files?
From the Theo824/Solar-Charger repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Solar-Charger design in my own project?
The repository has no license, so all rights stay with Theo824. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k