Pcb pcBOT
theocond48·2526_Projet1A_PcBot_G5·pcb/pcb_pcBOT/pcb_pcBOT.kicad_pcb
About the Pcb pcBOT
Pcb pcBOT is an open source STM32 PCB design by theocond48, published on GitHub under the MIT license. It is a 4-layer board measuring 68 × 58 mm, with 63 components from 30 distinct parts.
Its main chip is the STM32G431KBT6, from the STM32 family. Other key parts include the BQ25896RTW, BU33??, LSM6DSM and DRV8411A. By type, the board carries 21 resistors, 20 capacitors, 7 connectors, 5 ICs, 2 switches and 2 diodes.
It belongs with the power & battery, robotics & motion and sensors designs in this gallery.
From the project
Objectif : Concevoir un robot communicant (Swarm) pour la cartographie d'environnement. Volume horaire : 40 heures (10 séances x 4h).
Objectif : Concevoir un robot communicant (Swarm) pour la cartographie d'environnement. Volume horaire : 40 heures (10 séances x 4h).
- Travail en groupe réalisé par: Youssef Chemrakhi, Théodore Condette, Rayan Taoussi, Samy, Maroua Qidi.
- Définition du Besoin - Liste des fonctionnalités - Schéma architectural - Planification et Matériel - Planning prévisionnel - Choix des composants

Main components on the Pcb pcBOT
Pcb pcBOT bill of materials (BOM)
63 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ25896RTW | Texas_RTW_WQFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm_ThermalVias | U201 |
| 1 | STM32G431KBT6 | LQFP-32_7x7mm_P0.8mm | U301 |
| 1 | BU33?? | TSOT-23-5 | U303 |
| 1 | LSM6DSM | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U601 |
| 1 | DRV8411A | HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm_ThermalVias | U701 |
| 1 | Lipo | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J201 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J202 |
| 1 | Conn_ST_STDC14 | PinHeader_2x07_P1.27mm_Vertical_SMD | J302 |
| 1 | TOF1 | PinSocket_1x06_P2.54mm_Vertical | J501 |
| 1 | TOF2 | PinSocket_1x06_P2.54mm_Vertical | J502 |
| 1 | TOF3 | PinSocket_1x06_P2.54mm_Vertical | J503 |
| 1 | nrF24l01_rf | PinHeader_2x04_P2.54mm_Vertical | J802 |
| 1 | 10u | C_0603_1608Metric | Cbulk701 |
| 2 | Conn_01x02 | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | Moteur701, Moteur702 |
| 1 | 10k | R_0402_1005Metric | Rvmcu701 |
| 1 | ~{QON}_BUTTON | SW_PUSH_6mm | SW201 |
| 1 | Reset_Button | SW_PUSH_6mm | SW301 |
| 2 | LED | C_0402_1005Metric | D201, D202 |
| 1 | 1u | L_1008_2520Metric | L201 |
| 1 | 10n | C_0603_1608Metric | L301 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 1u | C_0402_1005Metric | C201, C305, C307, C309 |
| 5 | 10u | C_0603_1608Metric | C202, C205, C206, C207, C801 |
| 1 | 47n | C_0402_1005Metric | C203 |
| 1 | 4.7u | C_0603_1608Metric | C204 |
| 9 | 100n | C_0402_1005Metric | C208, C301, C302, C303, C304, C306, C601, C602 +1 |
| 5 | 2.2k | R_0402_1005Metric | R202, R204, R303, R304, R305 |
| 1 | 260 | R_0402_1005Metric | R206 |
| 11 | 10k | R_0402_1005Metric | R207, R208, R301, R302, R501, R502, R503, R504 +3 |
| 2 | 5k1 | R_0402_1005Metric | R209, R210 |
| 2 | 16k5 | R_0402_1005Metric | R-B701, R-IPROPI_A701 |
Pcb pcBOT design files
The KiCad project lives in the theocond48/2526_Projet1A_PcBot_G5 repository on GitHub; these links point at the commit this page was built from.
Pcb pcBOT: common questions
What microcontroller does the Pcb pcBOT use?
The Pcb pcBOT is built around the STM32G431KBT6, from the STM32 family.
How big is the Pcb pcBOT?
The Pcb pcBOT measures 68 × 58 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Pcb pcBOT?
63 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pcb pcBOT design files?
From the theocond48/2526_Projet1A_PcBot_G5 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pcb pcBOT design in my own project?
Yes, under the terms of its MIT license, which theocond48 chose for the repository.
Can I test firmware for the Pcb pcBOT without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in 2526_Projet1A_PcBot_G5
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k