9 open source boards using the STM32G431KBT6

Real designs built with the STM32G431KBT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the STM32G431KBT6

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the STM32G431KBT6 connects to, and the resistors, capacitors and other passives placed on it.

  • The PG10-NRST pin has a capacitor to GND on 8 of 8 designs, most often 100 nF.
  • The VDDA pin has a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 1 µF).
  • The VDD_1 pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 4.7 µF).
  • The VDD_2 pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 4.7 µF).
VDD_1pin 1Connected to: 3.3V 100%
  • Decoupling capacitor on 88% · 100 nF (9), 4.7 µF (1), 10 µF (1)
PF0-OSC_INpin 2Connected to: A connector 25%
  • Capacitor to GND on 63% · 12 pF (2), 10 pF (1), 100 nF (1)
  • Crystal on 50% · 8 MHz (3), 16 MHz (1)
PF1-OSC_OUTpin 3Connected to: A connector 25%
  • Capacitor to GND on 63% · 12 pF (2), 10 pF (1), 100 nF (1)
  • Crystal on 50% · 8 MHz (3), 16 MHz (1)
PG10-NRSTpin 4Connected to: A connector 75%
  • Capacitor to GND on 100% · 100 nF (8)
  • Pull-up to 3.3V on 38% · 10 kΩ (3)
PA0pin 5Connected to: Signal 88%
  • Series resistor on 63% · 100 kΩ (3), 470 kΩ (1), 1 kΩ (1)
  • Resistor to GND on 50% · 4.7 kΩ (2), 100 kΩ (1), 2 kΩ (1)
  • Capacitor to GND on 38% · 100 nF (2), 1 nF (1)
PA1pin 6Connected to: Signal 88%
  • Series resistor on 38% · 1 kΩ (2), 220 kΩ (1)
  • Capacitor to GND on 38% · 1 nF (3)
PA3pin 8Connected to: A connector 38%
  • Pull-up to 3.3V on 38% · 4.7 kΩ (2), 10 kΩ (1)
PA7pin 12Connected to: A connector 25%
  • Pull-up to 3.3V on 38% · 33 kΩ (2), 10 kΩ (1)
  • Series resistor on 38% · 1 kΩ (2), 33 Ω (1)
PB0pin 13Connected to: Signal 100%
  • Pull-up to 3.3V on 63% · 33 kΩ (2), 10 kΩ (2), 100 kΩ (1)
  • Series resistor on 38% · 1 kΩ (2), 4.7 kΩ (1)
  • Capacitor to GND on 38% · 1 nF (2), 100 nF (1)
VSSApin 14Connected to: GND 100%
VDDApin 15Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (9), 1 µF (4), 4.7 µF (2)
VSS_1pin 16Connected to: GND 100%
VDD_2pin 17Connected to: 3.3V 100%
  • Decoupling capacitor on 88% · 100 nF (9), 4.7 µF (3)
PA10pin 20Connected to: IR2104STRPBF 25%
  • Series resistor on 38% · 150 Ω (2), 4.7 kΩ (1), 1 kΩ (1)
PA15pin 25Connected to: A connector 38%
  • Pull-up to 3.3V on 38% · 10 kΩ (3)
PB7pin 30Connected to: A connector 25% · not connected 25%
  • Pull-up to 3.3V on 38% · 10 kΩ (2), 2.2 kΩ (1)
PB8-BOOT0pin 31Connected to: A connector 25%
  • Resistor to GND on 88% · 10 kΩ (5), 4.7 kΩ (2)
VSS_2pin 32Connected to: GND 100%

14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include AxxSolder hw by ITGuyFromIA2, Audio Watermark Generator by kristiangoystdal, Chromapi motherboard by Mowibox and Spinner by enkhbold470.

The STM32G431KBT6 in open source designs

The gallery holds 9 open source boards using the STM32G431KBT6 from 8 GitHub repositories; a typical one measures about 76 × 66 mm and carries around 83 components.

67% use four copper layers or more, and 67% carry an open source license.

The most starred is Chromapi motherboard by Mowibox.

Microcontrollers on boards using the STM32G431KBT6

STM32G431KBT6: common questions

Where can I find a STM32G431KBT6 reference design?

Each of the 9 boards on this page is a real design using the STM32G431KBT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the STM32G431KBT6 PG10-NRST pin connected?

The PG10-NRST pin has a capacitor to GND on 8 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the STM32G431KBT6.

What decoupling capacitors do designs use on the STM32G431KBT6 VDDA pin?

The VDDA pin has a decoupling capacitor on 8 of 8 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the STM32G431KBT6.

What decoupling capacitors do designs use on the STM32G431KBT6 VDD_1 pin?

The VDD_1 pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 8 open source designs using the STM32G431KBT6.

What parts are used alongside the STM32G431KBT6?

The AP63203WU-7, IR2104STRPBF, L78L12ABUTR, MT6701CT-STD and TCAN332GDR appear in the most repositories here.

Which microcontrollers do boards using the STM32G431KBT6 use?

Most are built on STM32 (9).

How big is a typical board using the STM32G431KBT6?

The median is 76 × 66 mm, and 33% are two-layer designs.

What is the most popular open source board using the STM32G431KBT6?

By GitHub stars, Chromapi motherboard by Mowibox, with 1 stars.

Can I simulate one of these boards using the STM32G431KBT6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part