Drv
theocond48·2526_Projet1A_PcBot_G5·pcb/pcb_pcBOT/drv.kicad_pcb

About the Drv PCB
Drv is an open source PCB design by theocond48, published on GitHub under the MIT license. It is a 2-layer board, with 9 components from 6 distinct parts.
Other key parts include the DRV8411A. By type, the board carries 2 ICs, 2 resistors and 1 capacitor.
It belongs with the power & battery, robotics & motion and sensors designs in this gallery.
From the project
Objectif : Concevoir un robot communicant (Swarm) pour la cartographie d'environnement. Volume horaire : 40 heures (10 séances x 4h).
Objectif : Concevoir un robot communicant (Swarm) pour la cartographie d'environnement. Volume horaire : 40 heures (10 séances x 4h).
- Travail en groupe réalisé par: Youssef Chemrakhi, Théodore Condette, Rayan Taoussi, Samy, Maroua Qidi.
- Définition du Besoin - Liste des fonctionnalités - Schéma architectural - Planification et Matériel - Planning prévisionnel - Choix des composants
Main components on the Drv
Drv bill of materials (BOM)
9 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | DRV8411A | HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm_ThermalVias | U1, U701 |
| 1 | 10u | C_0603_1608Metric | Cbulk701 |
| 2 | Conn_01x02 | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | Moteur701, Moteur702 |
| 1 | 10k | R_0402_1005Metric | Rvmcu701 |
| 1 | 100n | C_0402_1005Metric | C701 |
| 2 | 16k5 | R_0402_1005Metric | R-IPROPI_A701, R-IPROPI_B701 |
Drv design files
The KiCad project lives in the theocond48/2526_Projet1A_PcBot_G5 repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/pcb_pcBOT/drv.kicad_pcb
- Schematicpcb/pcb_pcBOT/drv.kicad_sch
Drv: common questions
How big is the Drv PCB?
The Drv has 2 copper layers and is 1.6 mm thick.
How many components are on the Drv?
9 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Drv design files?
From the theocond48/2526_Projet1A_PcBot_G5 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Drv design in my own project?
Yes, under the terms of its MIT license, which theocond48 chose for the repository.
More boards in 2526_Projet1A_PcBot_G5
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k