3 open source boards using the DRV8411A
Real designs built with the DRV8411A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
SparkFun XRP Controller
sparkfun
63.5 × 54 mm176 parts6LMIT14STM32
Pcb pcBOT
theocond48
68 × 58 mm63 parts4LMIT0- schematic only · 9 parts
Drv
theocond48
9 parts2LMIT0
The DRV8411A in open source designs
The gallery holds 3 open source boards using the DRV8411A from 2 GitHub repositories; a typical one measures about 65.8 × 56 mm and carries around 63 components.
67% use four copper layers or more, and 100% carry an open source license.
The most starred is SparkFun XRP Controller by sparkfun.
Microcontrollers on boards using the DRV8411A
What boards using the DRV8411A are built for
DRV8411A: common questions
Where can I find a DRV8411A reference design?
Each of the 3 boards on this page is a real design using the DRV8411A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the DRV8411A use?
Most are built on RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the DRV8411A?
The median is 65.8 × 56 mm, and 33% are two-layer designs.
What is the most popular open source board using the DRV8411A?
By GitHub stars, SparkFun XRP Controller by sparkfun, with 14 stars.
Can I simulate one of these boards using the DRV8411A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.