Numhackpad
thesleepyniko·numhackpad·PCB/hackpad.kicad_pcb
About the Numhackpad PCB
Numhackpad is an open source RP2040/RP2350 PCB design by thesleepyniko, published on GitHub. It is a 2-layer board measuring 112 × 105 mm, with 33 components from 5 distinct parts.
Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 16 switches, 16 diodes and 1 IC.
It belongs with the keyboards designs in this gallery.
From the project
hack club hackpad thingy
numhackpad is a 16 key macropad with nothing else except for cool oneshot art
it has 2 printed pieces: the bottom and the top of the case
- the 16 keys act as a numpad, it is missing the delete key
- 16x Cherry MX Switches - 16x DSA Keycaps - 8x M3x5x4 Heatset inserts - 8x M3x16mm screws - 16x 1N4148 DO-35 Diodes. - 1x XIAO RP2040 - 1x Case (2 printed parts) - 1x PCB

Main components on the Numhackpad
Numhackpad bill of materials (BOM)
33 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-RP2040-DIP | XIAO-RP2040-DIP | U1 |
| 13 | SW_Push_45deg | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW9 +5 |
| 2 | SW_Push_45deg | SW_Cherry_MX_2.00u_Vertical_PCB | SW8, SW16 |
| 1 | SW_Push_45deg | SW_Cherry_MX_2.00u_PCB | SW17 |
| 16 | D | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 +8 |
Numhackpad design files
The KiCad project lives in the thesleepyniko/numhackpad repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/hackpad.kicad_pcb
- SchematicPCB/hackpad.kicad_sch
Numhackpad: common questions
What microcontroller does the Numhackpad use?
The Numhackpad is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.
How big is the Numhackpad PCB?
The Numhackpad measures 112 × 105 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Numhackpad?
33 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Numhackpad design files?
From the thesleepyniko/numhackpad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Numhackpad design in my own project?
The repository has no license, so all rights stay with thesleepyniko. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Numhackpad without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k