Lora tracker
tiborkiss·lora-tracker-kicad
About the Lora tracker PCB
Lora tracker is an open source PCB design by tiborkiss, published on GitHub under the MIT license. It is a 4-layer board measuring 77 × 74 mm, with 103 components from 41 distinct parts.
Other key parts include the AP7333-33SAG-7, SHT41, NC (H3LIS331DL), BMI270 and MODULE-LORAMODULE-WM1110-A_01. By type, the board carries 42 capacitors, 24 resistors, 8 diodes, 7 inductors, 6 ICs and 5 connectors.
It belongs with the rf & radio, displays & leds and sensors designs in this gallery.
From the project
KiCad design of a small LoRa tracker board, created as a Swiss Zukunftstag project: with a group of children we build a working Meshtastic tracker that the kids can take home and use.
KiCad design of a small LoRa tracker board, created as a Swiss Zukunftstag project: with a group of children we build a working Meshtastic tracker that the kids can take home and use.
The tracker is deliberately powered by three ordinary AA batteries — no Li-ion cell — so it is simple and safe for children to handle and charge.
- Seeed Wio WM1110 module (LR1110 packet/radio controller) - BMI270 motion sensor (wake-on-movement) - ST7789 display on a 4-pin connector - Active GNSS antenna + SMA LoRa antenna - USB-C, SWD debug header - Battery holder for 3× AA
Main components on the Lora tracker
Lora tracker bill of materials (BOM)
103 components, 41 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP7333-33SAG-7 | SOT-23 | U1 |
| 1 | SHT41 | SNR4-0.8-1.5X1.5X0.54MM | U2 |
| 1 | NC (H3LIS331DL) | LGA16-0.5-3X3MM | U3 |
| 1 | BMI270 | BMI270_BOS | U4 |
| 1 | MODULE-LORAMODULE-WM1110-A_01 | MODULE72_0D9_20X20X2MM | U5 |
| 1 | LC76G | LC76G | U100 |
| 2 | SLMT320V3CP | SOT-23 | Q4, Q5 |
| 1 | SC32S-7PF20PPM | XTAL2-1.5X3.2 | X1 |
| 1 | NC | PinHeader_2x10_P1.27mm_Vertical_SMD | J1 |
| 1 | Conn_Coaxial | SMA_Amphenol_132134_Vertical | J2 |
| 1 | NC | PinHeader_1x02_P2.00mm_Vertical | J3 |
| 1 | NC | Molex_Micro-Latch_53253-0470_1x04_P2.00mm_Vertical | J4 |
| 1 | 5051102891 | CON_5051105091_MOL | J6 |
| 1 | ANT 2525 B 00B T 1575S | ANT 2525 B 00B T 1575S | AE1 |
| 3 | Battery_Cell AA | keystone_2460 | BT1, BT2, BT3 |
| 1 | 0ZCJ0025FF2E | FS1206 | F1 |
| 1 | CPT-9019 | Buzzer_CUI_CPT-9019S-SMT | LS1 |
| 1 | PEC12R-4222F-S0024 | RotaryEncoder_Bourns_Vertical_PEC12R-3x17F-S--oli | SW3 |
| 1 | UBF31-0171 | USB2.0-TYPE-C | USB1 |
| 2 | IN-S63AT5A | LED_0603_1608Metric | D1, D4 |
Show 21 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | B0530WS RRG | D_SOD-323F | D2, D3 |
| 1 | D5V0F4U6V | SOT-563 | D7 |
| 2 | SMAJ5.0A | D_SMA | D9, D10 |
| 1 | SMBJ3V3-E3/52 | D_SMA | D11 |
| 3 | MI0603L221R-10 | 0603_L | L1, L2, L4 |
| 4 | SHORT | 0402_L | L3, L5, L6, L10 |
| 11 | NC | 0402_C | C2, C14, C15, C20, C22, C25, C26, C27 +3 |
| 13 | 10U/10V 10u/10V | 0603_C | C3, C4, C5, C6, C7, C16, C17, C23 +5 |
| 14 | 100N 100n | 0402_C | C8, C10, C12, C18, C19, C21, C28, C33 +6 |
| 2 | 1P0 1p0 | 0402_C | C11, C13 |
| 2 | GSEZ7B002 | 0402_C | C30, C37 |
| 2 | 5K1 5k1 | 0402_R | R1, R6 |
| 1 | 1k | 0402_R | R2 |
| 2 | 220 | 0402_R | R3, R10 |
| 2 | 100K 100k | 0402_R | R4, R7 |
| 4 | NC | 0402_R | R5, R16, R17, R21 |
| 2 | 22 | 0402_R | R8, R9 |
| 1 | 10K 10k | 0804-8 | R11 |
| 3 | 100 | 0804-8 | R12, R14, R15 |
| 4 | 2K2 2k2 | 0402_R | R13, R18, R22, R23 |
| 3 | SHORT | 0402_R | R19, R20, R24 |
Lora tracker design files
The KiCad project lives in the tiborkiss/lora-tracker-kicad repository on GitHub; these links point at the commit this page was built from.
- Layoutträckthäspäck.kicad_pcb
- Schematicträckthäspäck.kicad_sch
- BOMträckthäspäck.csv
Lora tracker: common questions
How big is the Lora tracker PCB?
The Lora tracker measures 77 × 74 mm, has 4 copper layers and is 1.562 mm thick.
How many components are on the Lora tracker?
103 components, from 41 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Lora tracker design files?
From the tiborkiss/lora-tracker-kicad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Lora tracker design in my own project?
Yes, under the terms of its MIT license, which tiborkiss chose for the repository.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k