Buttons
TiebeDeclercq·Munt-sorteer--en-opslagsysteem·SeperatePCB's/ButtonsPCB/ButtonsPCB.kicad_pcb
About the Buttons PCB
Buttons is an open source PCB design by TiebeDeclercq, published on GitHub. It is a 2-layer board measuring 84.2 × 20.3 mm, with 26 components from 5 distinct parts.
By type, the board carries 16 resistors, 8 switches and 2 connectors.
From the project
My design is a coin sorting and storage system aimed at effectively addressing the issue of loose change in the household. By storing all your coins in one central location, all the inconveniences of scattered small change are eliminated, and you have an accurate overview of your
My design is a coin sorting and storage system aimed at effectively addressing the issue of loose change in the household. By storing all your coins in one central location, all the inconveniences of scattered small change are eliminated, and you have an accurate overview of your available loose change at all times. In this document, I will meticulously walk through the various phases of the project, detailing the development and implementation of the coin sorting and storage system step by step. All necessary information, including components and diagrams, is included in my document…

Buttons bill of materials (BOM)
26 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Horizontal | J1 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Horizontal | J9 |
| 8 | SW_Push | SW_SPST_PTS645 | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 8 | 470Ω | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R5, R7, R9, R11, R13, R15 |
| 8 | 10KΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4, R6, R8, R10, R12, R14, R16 |
Buttons design files
The KiCad project lives in the TiebeDeclercq/Munt-sorteer--en-opslagsysteem repository on GitHub; these links point at the commit this page was built from.
Buttons: common questions
How big is the Buttons PCB?
The Buttons measures 84.2 × 20.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Buttons?
26 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Buttons design files?
From the TiebeDeclercq/Munt-sorteer--en-opslagsysteem repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Buttons design in my own project?
The repository has no license, so all rights stay with TiebeDeclercq. Use it as a reference, and ask the author before reusing the design.
More boards in Munt-sorteer--en-opslagsysteem
IrDetectieBoard
TiebeDeclercq
106.7 × 26.7 mm71 parts2LNo license0ESP32
MuntsorteerderESP
TiebeDeclercq
52.8 × 69 mm51 parts2LNo license0AVR/Arduino
PCBatmega324p
TiebeDeclercq
98.4 × 71.8 mm43 parts2LNo license0ServoDriverBoard
TiebeDeclercq
68.6 × 38.1 mm26 parts2LNo license0IrBoards
TiebeDeclercq
25.4 × 33 mm23 parts2LNo license0ServoDriverBoardBeforeAuto
TiebeDeclercq
68.6 × 38.1 mm20 parts2LNo license0MotorBoard
TiebeDeclercq
19.7 × 26 mm8 parts2LNo license0