MuntsorteerderESP
TiebeDeclercq·Munt-sorteer--en-opslagsysteem·SeperatePCB's/MuntsorteerderESP/MuntsorteerderESP.kicad_pcb
About the MuntsorteerderESP PCB
MuntsorteerderESP is an open source ESP32 PCB design by TiebeDeclercq, published on GitHub. It is a 2-layer board measuring 52.8 × 69 mm, with 51 components from 31 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N16R2, from the ESP32 family. Other key parts include the AMS1117-3.3, 74HC595D, CD4066BM and L293D. By type, the board carries 11 connectors, 10 capacitors, 7 modules, 7 resistors, 6 ICs and 5 diodes.
From the project
My design is a coin sorting and storage system aimed at effectively addressing the issue of loose change in the household. By storing all your coins in one central location, all the inconveniences of scattered small change are eliminated, and you have an accurate overview of your
My design is a coin sorting and storage system aimed at effectively addressing the issue of loose change in the household. By storing all your coins in one central location, all the inconveniences of scattered small change are eliminated, and you have an accurate overview of your available loose change at all times. In this document, I will meticulously walk through the various phases of the project, detailing the development and implementation of the coin sorting and storage system step by step. All necessary information, including components and diagrams, is included in my document…

Main components on the MuntsorteerderESP
MuntsorteerderESP bill of materials (BOM)
51 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N16R2 | XCVR_ESP32-S3-WROOM-1-N16R2 | U1 |
| 1 | AMS1117-3.3 | SOT229P700X180-4N | U2 |
| 1 | 74HC595D | SOP127P600X175-16N | U3 |
| 2 | CD4066BM | SOIC127P600X175-14N | U4, U5 |
| 1 | L293D | DIP-16_W7.62mm | U6 |
| 6 | Motor_Servo | PinHeader_1x03_P2.54mm_Vertical | M1, M2, M3, M4, M5, M6 |
| 1 | Motor_DC | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | M7 |
| 1 | TYPE-C-31-M-12 | HRO_TYPE-C-31-M-12 | J1 |
| 1 | LCD | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | IR sensoren | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Drukknoppen | PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | 5V headers | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | 3.3V headers | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | GND headers | PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J8 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | Conn_01x01_Pin | PinHeader_1x01_P2.54mm_Vertical | J10 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | Buzzer | Buzzer_12x9.5RM7.6 | BZ1 |
| 2 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | PTS810_SJM_250_SMTR_LFS | SW_PTS810_SJM_250_SMTR_LFS | SW1, SW2 |
| 1 | 1N5819HW-7-F | SOD3715X145N | D1 |
| 3 | LESD5D5.0CT1G | TVS_LESD5D5.0CT1G | D2, D3, D4 |
| 1 | PowerLed | LED_0805_2012Metric | D5 |
| 1 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 5 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C5, C8, C9, C10 |
| 4 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C6, C7 |
| 3 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R5, R6 |
| 2 | 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 1 | 75 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
MuntsorteerderESP design files
The KiCad project lives in the TiebeDeclercq/Munt-sorteer--en-opslagsysteem repository on GitHub; these links point at the commit this page was built from.
MuntsorteerderESP: common questions
What microcontroller does the MuntsorteerderESP use?
The MuntsorteerderESP is built around the ESP32-S3-WROOM-1-N16R2, from the ESP32 family.
How big is the MuntsorteerderESP PCB?
The MuntsorteerderESP measures 52.8 × 69 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MuntsorteerderESP?
51 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the MuntsorteerderESP design files?
From the TiebeDeclercq/Munt-sorteer--en-opslagsysteem repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MuntsorteerderESP design in my own project?
The repository has no license, so all rights stay with TiebeDeclercq. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MuntsorteerderESP without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Munt-sorteer--en-opslagsysteem
IrDetectieBoard
TiebeDeclercq
106.7 × 26.7 mm71 parts2LNo license0AVR/Arduino
PCBatmega324p
TiebeDeclercq
98.4 × 71.8 mm43 parts2LNo license0Buttons
TiebeDeclercq
84.2 × 20.3 mm26 parts2LNo license0ServoDriverBoard
TiebeDeclercq
68.6 × 38.1 mm26 parts2LNo license0IrBoards
TiebeDeclercq
25.4 × 33 mm23 parts2LNo license0ServoDriverBoardBeforeAuto
TiebeDeclercq
68.6 × 38.1 mm20 parts2LNo license0MotorBoard
TiebeDeclercq
19.7 × 26 mm8 parts2LNo license0
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k