ServoDriverBoardBeforeAuto

TiebeDeclercq·Munt-sorteer--en-opslagsysteem·SeperatePCB's/ServoDriverBoard/ServoDriverBoardBeforeAuto.kicad_pcb

ServoDriverBoardBeforeAuto PCB layout, top view — open source board by TiebeDeclercq

About the ServoDriverBoardBeforeAuto PCB

ServoDriverBoardBeforeAuto is an open source PCB design by TiebeDeclercq, published on GitHub. It is a 2-layer board measuring 68.6 × 38.1 mm, with 20 components from 6 distinct parts.

Other key parts include the 74HC595 and CD4066BE. By type, the board carries 9 connectors, 6 modules, 3 ICs, 1 diode and 1 resistor.

From the project

My design is a coin sorting and storage system aimed at effectively addressing the issue of loose change in the household. By storing all your coins in one central location, all the inconveniences of scattered small change are eliminated, and you have an accurate overview of your

My design is a coin sorting and storage system aimed at effectively addressing the issue of loose change in the household. By storing all your coins in one central location, all the inconveniences of scattered small change are eliminated, and you have an accurate overview of your available loose change at all times. In this document, I will meticulously walk through the various phases of the project, detailing the development and implementation of the coin sorting and storage system step by step. All necessary information, including components and diagrams, is included in my document…

ServoDriverBoardBeforeAuto, from the project README
From the project README

Main components on the ServoDriverBoardBeforeAuto

ServoDriverBoardBeforeAuto bill of materials (BOM)

20 components, 6 distinct parts.

QtyPartRefs
1
74HC595
U1
2
CD4066BE
U2, U3
6
Motor_Servo
M1, M2, M3, M4, M5, M6
9
Conn_01x01_Pin
J1, J2, J3, J4, J5, J6, J7, J8 +1
1
LED
D1
1
R
R1

ServoDriverBoardBeforeAuto design files

The KiCad project lives in the TiebeDeclercq/Munt-sorteer--en-opslagsysteem repository on GitHub; these links point at the commit this page was built from.

ServoDriverBoardBeforeAuto: common questions

How big is the ServoDriverBoardBeforeAuto PCB?

The ServoDriverBoardBeforeAuto measures 68.6 × 38.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ServoDriverBoardBeforeAuto?

20 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the ServoDriverBoardBeforeAuto design files?

From the TiebeDeclercq/Munt-sorteer--en-opslagsysteem repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the ServoDriverBoardBeforeAuto design in my own project?

The repository has no license, so all rights stay with TiebeDeclercq. Use it as a reference, and ask the author before reusing the design.

More boards in Munt-sorteer--en-opslagsysteem