PCBatmega324p
TiebeDeclercq·Munt-sorteer--en-opslagsysteem·SeperatePCB's/PCBatmega324p/PCBatmega324p.kicad_pcb
About the PCBatmega324p PCB
PCBatmega324p is an open source AVR/Arduino PCB design by TiebeDeclercq, published on GitHub. It is a 2-layer board measuring 98.4 × 71.8 mm, with 43 components from 26 distinct parts.
Its main chip is the ATmega324P-20P, from the AVR/Arduino family. Other key parts include the L293D, 74HC595 and CD4066BE. By type, the board carries 14 connectors, 8 ICs, 7 modules, 4 capacitors, 4 resistors and 3 jumpers.
From the project
My design is a coin sorting and storage system aimed at effectively addressing the issue of loose change in the household. By storing all your coins in one central location, all the inconveniences of scattered small change are eliminated, and you have an accurate overview of your
My design is a coin sorting and storage system aimed at effectively addressing the issue of loose change in the household. By storing all your coins in one central location, all the inconveniences of scattered small change are eliminated, and you have an accurate overview of your available loose change at all times. In this document, I will meticulously walk through the various phases of the project, detailing the development and implementation of the coin sorting and storage system step by step. All necessary information, including components and diagrams, is included in my document…

Main components on the PCBatmega324p
PCBatmega324p bill of materials (BOM)
43 components, 26 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L293D | DIP-16_W7.62mm | U1 |
| 2 | ~ | Buck_Converter | U10, U11 |
| 1 | ATmega324P-20P | DIP-40_W15.24mm_Socket | U15 |
| 2 | 74HC595 | SO-16_3.9x9.9mm_P1.27mm | U20, U21 |
| 2 | CD4066BE | SO-14_3.9x8.65mm_P1.27mm | U22, U23 |
| 1 | Motor_DC | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | M1 |
| 6 | Motor_Servo | PinHeader_1x03_P2.54mm_Vertical | M2, M3, M4, M5, M6, M7 |
| 1 | Crystal | Crystal_HC49-4H_Vertical | Y1 |
| 1 | Barrel_Jack | BarrelJack_GCT_DCJ200-10-A_Horizontal | J1 |
| 1 | Conn_01x06_Socket | PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | AVR-ISP-6 | PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | LCDconn | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J6 |
| 2 | portD_21 | PinHeader_1x01_P2.54mm_Vertical | J7, J8 |
| 2 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J9, J10 |
| 2 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J11, J14 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J12 |
| 2 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J13, J15 |
| 1 | Buzzer | Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1 |
| 2 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Jumper_2_Open | PinHeader_1x02_P2.54mm_Vertical | JP7 |
| 1 | SW_Push | SW_SPST_PTS645 | SW9 |
| 2 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C18 |
| 2 | 22pF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16, C17 |
| 3 | 10KΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R45 |
| 1 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R33 |
PCBatmega324p design files
The KiCad project lives in the TiebeDeclercq/Munt-sorteer--en-opslagsysteem repository on GitHub; these links point at the commit this page was built from.
PCBatmega324p: common questions
What microcontroller does the PCBatmega324p use?
The PCBatmega324p is built around the ATmega324P-20P, from the AVR/Arduino family.
How big is the PCBatmega324p PCB?
The PCBatmega324p measures 98.4 × 71.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCBatmega324p?
43 components, from 26 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCBatmega324p design files?
From the TiebeDeclercq/Munt-sorteer--en-opslagsysteem repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PCBatmega324p design in my own project?
The repository has no license, so all rights stay with TiebeDeclercq. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PCBatmega324p without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in Munt-sorteer--en-opslagsysteem
IrDetectieBoard
TiebeDeclercq
106.7 × 26.7 mm71 parts2LNo license0ESP32
MuntsorteerderESP
TiebeDeclercq
52.8 × 69 mm51 parts2LNo license0Buttons
TiebeDeclercq
84.2 × 20.3 mm26 parts2LNo license0ServoDriverBoard
TiebeDeclercq
68.6 × 38.1 mm26 parts2LNo license0IrBoards
TiebeDeclercq
25.4 × 33 mm23 parts2LNo license0ServoDriverBoardBeforeAuto
TiebeDeclercq
68.6 × 38.1 mm20 parts2LNo license0MotorBoard
TiebeDeclercq
19.7 × 26 mm8 parts2LNo license0
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k