Sonoff zbminir2 24Vmod
TimGoll·sonoff_zbminir2_24Vmod·main_board_24V/main_board_24V.kicad_pcb
About the Sonoff zbminir2 24Vmod PCB
Sonoff zbminir2 24Vmod is an open source PCB design by TimGoll, published on GitHub under the MIT license. It is a 2-layer board measuring 29.8 × 36.3 mm, with 17 components from 12 distinct parts.
Other key parts include the TI TLV75733PDBV and LMQ66430R5RXBR. By type, the board carries 8 capacitors, 2 ICs, 2 diodes, 2 resistors, 1 transistor and 1 connector.
It belongs with the iot & wireless and power & battery designs in this gallery.
From the project
Sonoff ZBMINIR2 modded to run on 24V
I have a cupboard with an always-on 24V supply in it, and I wanted to switch a light in there via Zigbee. At the same time it should still look and feel like a normal electrical installation, with a regular wall switch (a standard 230V rated Merten switch) instead of some odd push button.
The Sonoff ZBMINIR2 does exactly that, just for 100-240V AC. So instead of building something from scratch, I designed a replacement mainboard that lets it run on 24V DC. Zigbee module, relay, enclosure and firmware all stay original.

Main components on the Sonoff zbminir2 24Vmod
Sonoff zbminir2 24Vmod bill of materials (BOM)
17 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TI TLV75733PDBV TLV75733PDBV | SOT-23-5 | U1 |
| 1 | LMQ66430R5RXBR | TI_VQFN_15_EP | U2 |
| 1 | MMBT5551 | SOT-23 | Q1 |
| 1 | WJ126V-5.0-06P-14-00A | TerminalBlock_MaiXu_MX126-5.0-06P_1x06_P5.00mm | J1 |
| 2 | SMF24A | D_SOD-123F | D1, D7 |
| 1 | 4U7 4u7 | L_Sunlord_SWPA4030S | L1 |
| 1 | 47U 47u | CP_Elec_6.3x7.7 | C1 |
| 2 | Samsung CL10A225KO5LNW 2u2 | C_0603_1608Metric | C2, C6 |
| 2 | 10U 10u | C_1206_3216Metric | C3, C4 |
| 1 | 1u | C_0402_1005Metric | C5 |
| 2 | 47U 47u | C_1206_3216Metric | C7, C8 |
| 2 | 100K 100k | R_0402_1005Metric | R1, R2 |
Sonoff zbminir2 24Vmod design files
The KiCad project lives in the TimGoll/sonoff_zbminir2_24Vmod repository on GitHub; these links point at the commit this page was built from.
Sonoff zbminir2 24Vmod: common questions
How big is the Sonoff zbminir2 24Vmod PCB?
The Sonoff zbminir2 24Vmod measures 29.8 × 36.3 mm, has 2 copper layers and is 1 mm thick.
How many components are on the Sonoff zbminir2 24Vmod?
17 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Sonoff zbminir2 24Vmod design files?
From the TimGoll/sonoff_zbminir2_24Vmod repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Sonoff zbminir2 24Vmod design in my own project?
Yes, under the terms of its MIT license, which TimGoll chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k