TripleController
timville85·TripleController·3dapter KiCad/3dapter.kicad_pcb
About the TripleController PCB
TripleController is an open source PCB design by timville85, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 40.6 × 64.8 mm, with 4 components from 4 distinct parts.
Other key parts include the ProMicro. By type, the board carries 3 connectors and 1 IC.
It belongs with the retro computing designs in this gallery.
From the project
This project combines the NES, SNES and Genesis DaemonBite Retro Controllers projects together with a custom PCB to support 3 different controllers with a single socketed Arduino Pro Micro. PCB (KiCad + Gerbers), 3D Cases, and muliple firmware versions (Arduino code) all availabl
This project combines the NES, SNES and Genesis DaemonBite Retro Controllers projects together with a custom PCB to support 3 different controllers with a single socketed Arduino Pro Micro. PCB (KiCad + Gerbers), 3D Cases, and muliple firmware versions (Arduino code) all available in this repository.
PCB Kits + Fully Assembled units (with firmware of your choice) available on Tindie
Main components on the TripleController
TripleController bill of materials (BOM)
4 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ProMicro | ProMicro | U1 |
| 1 | NES Port | NES | J1 |
| 1 | SNES Port | SNES | J2 |
| 1 | Genesis Port (DB9) | DSUB-9_Male_Horizontal_P2.77x2.54mm_EdgePinOffset9.40mm | J3 |
TripleController design files
The KiCad project lives in the timville85/TripleController repository on GitHub; these links point at the commit this page was built from.
TripleController: common questions
How big is the TripleController PCB?
The TripleController measures 40.6 × 64.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the TripleController?
4 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the TripleController design files?
From the timville85/TripleController repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the TripleController design in my own project?
Yes, under the terms of its GPL-3.0 license, which timville85 chose for the repository.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k