Silent stepper v2-bricklet
Tinkerforge·silent-stepper-v2-bricklet·hardware/silent-stepper-v2.kicad_pcb
About the Silent stepper v2-bricklet PCB
Silent stepper v2-bricklet is an open source PCB design by Tinkerforge, published on GitHub. It is a 2-layer board measuring 40 × 40 mm, with 68 components from 45 distinct parts.
Other key parts include the XMC1404, DRILL and TMC2130. By type, the board carries 30 capacitors, 18 resistors, 6 ICs, 6 connectors, 3 diodes and 1 transistor.
It belongs with the robotics & motion designs in this gallery.
From the project
Silently drives one bipolar stepper motor with up to 46V and 1.6A per phase
Silent Stepper Bricklet 2.0 ===========================
This repository contains the firmware source code and the hardware design files. The documentation generator configs can be found at https://github.com/Tinkerforge/generators
software/: examples/: Examples for all supported languages build/: Compiled files src/: Source code of firmware Makefile: Makefile to build project
Main components on the Silent stepper v2-bricklet
Silent stepper v2-bricklet bill of materials (BOM)
68 components, 45 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XMC1404 | QFN48-EP2 | U1 |
| 4 | DRILL | DRILL_NP | U2, U3, U4, U5 |
| 1 | TMC2130 | QFN36_5X6 | U6 |
| 1 | AO4438 | SOIC-8-MOSFET | Q1 |
| 1 | 16MHz | CRYSTAL_3225 | X1 |
| 1 | CON-SENSOR2 | CON-SENSOR2 | P1 |
| 1 | BOOT | SolderJumper | P2 |
| 1 | DEBUG | DEBUG_PAD | P3 |
| 1 | black | OQ_2P | P4 |
| 1 | green | OQ_4P | P5 |
| 1 | CONN_01X03 | JST-PH-3-THT | P6 |
| 1 | 82 | 4X0402 | RP1 |
| 1 | 220 | 4X0402 | RP2 |
| 1 | 1k | 4X0603 | RP3 |
| 1 | Z12V | SOD-123 | D1 |
| 1 | red | D0603F | D2 |
| 1 | blue | D0603F | D3 |
| 3 | 10uF | C0805 | C1, C29, C30 |
| 1 | 1uF | C0603F | C2 |
| 4 | 100nF | C0603F | C3, C4, C5, C14 |
Show 25 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 220nF | C0603F | C6 |
| 1 | 220pF | C0402F | C7 |
| 2 | 10pF | C0603F | C8, C9 |
| 4 | 100nF | C0402F | C10, C18, C26, C27 |
| 1 | 330µF/50V | ELKO_103 | C11 |
| 1 | 470nF | C0402F | C12 |
| 1 | 4.7µF | C0603F | C13 |
| 4 | 100nF/50V | C0603F | C15, C17, C20, C22 |
| 1 | 22nF/50V-low | C0603F | C16 |
| 4 | 470pF/100V | C0603F | C19, C21, C23, C25 |
| 1 | 4.7µF/50V | C1206E | C24 |
| 1 | DNP | C0603F | C28 |
| 2 | 100 | R0402F | R1, R16 |
| 1 | 100k | R0402F | R2 |
| 1 | 15k | R0402F | R3 |
| 3 | 1k | R0402F | R4, R6, R9 |
| 1 | FB | R0603F | R5 |
| 1 | 220 | R0402F | R7 |
| 1 | 2R2 | R0402F | R8 |
| 1 | 3.9k | R0402F | R10 |
| 1 | 560 | R0402F | R11 |
| 2 | 0.12/0.5W | R1206E | R12, R13 |
| 1 | 470 | R0603F | R14 |
| 1 | 0 | R0603F | R15 |
| 2 | 10K | R0402F | R17, R18 |
Silent stepper v2-bricklet design files
The KiCad project lives in the Tinkerforge/silent-stepper-v2-bricklet repository on GitHub; these links point at the commit this page was built from.
Silent stepper v2-bricklet: common questions
How big is the Silent stepper v2-bricklet PCB?
The Silent stepper v2-bricklet measures 40 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Silent stepper v2-bricklet?
68 components, from 45 distinct parts. The full bill of materials is listed on this page.
Where can I download the Silent stepper v2-bricklet design files?
From the Tinkerforge/silent-stepper-v2-bricklet repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Silent stepper v2-bricklet design in my own project?
The repository has no license, so all rights stay with Tinkerforge. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979