HackPiano
Tinkering-Townsperson·HackPiano·pcb/midi_macropad.kicad_pcb
About the HackPiano PCB
HackPiano is an open source RP2040/RP2350 PCB design by Tinkering-Townsperson, published on GitHub under the MIT license. It is a 2-layer board measuring 204.8 × 61.9 mm, with 35 components from 5 distinct parts.
Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 17 switches, 16 diodes, 1 IC and 1 connector.
It belongs with the keyboards and audio designs in this gallery.
Main components on the HackPiano
HackPiano bill of materials (BOM)
35 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-RP2040-DIP | XIAO-RP2040-DIP | U1 |
| 1 | Conn_01x04_Pin | SSD1306-0.91-OLED-4pin-128x32 | J1 |
| 16 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +8 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW17 |
| 16 | D_Small | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8 +8 |
HackPiano design files
The KiCad project lives in the Tinkering-Townsperson/HackPiano repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/midi_macropad.kicad_pcb
- Schematicpcb/midi_macropad.kicad_sch
HackPiano: common questions
What microcontroller does the HackPiano use?
The HackPiano is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.
How big is the HackPiano PCB?
The HackPiano measures 204.8 × 61.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the HackPiano?
35 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the HackPiano design files?
From the Tinkering-Townsperson/HackPiano repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the HackPiano design in my own project?
Yes, under the terms of its MIT license, which Tinkering-Townsperson chose for the repository.
Can I test firmware for the HackPiano without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k