ATmega32u4-Breakout
Tiogaplanet·ATmega32u4-Breakout·ATmega32u4 Breakout/ATmega32u4 Breakout.kicad_pcb
About the ATmega32u4-Breakout
ATmega32u4-Breakout is an open source AVR/Arduino PCB design by Tiogaplanet, published on GitHub. It is a 2-layer board measuring 24.4 × 57.4 mm, with 6 components from 4 distinct parts.
Its main chip is the ATmega32U4-AU, from the AVR/Arduino family. By type, the board carries 2 connectors, 2 capacitors, 1 IC and 1 crystal.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
A breakout board for the ATmega32u4.
Main components on the ATmega32u4-Breakout
ATmega32u4-Breakout bill of materials (BOM)
6 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega32U4-AU | TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | 16MHz | Crystal_HC49-U_Vertical | Y1 |
| 2 | Conn_01x22_Male | PinHeader_1x22_P2.54mm_Vertical | J1, J2 |
| 2 | 22pF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2 |
ATmega32u4-Breakout design files
The KiCad project lives in the Tiogaplanet/ATmega32u4-Breakout repository on GitHub; these links point at the commit this page was built from.
ATmega32u4-Breakout: common questions
What microcontroller does the ATmega32u4-Breakout use?
The ATmega32u4-Breakout is built around the ATmega32U4-AU, from the AVR/Arduino family.
How big is the ATmega32u4-Breakout?
The ATmega32u4-Breakout measures 24.4 × 57.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ATmega32u4-Breakout?
6 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the ATmega32u4-Breakout design files?
From the Tiogaplanet/ATmega32u4-Breakout repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the ATmega32u4-Breakout design in my own project?
The repository has no license, so all rights stay with Tiogaplanet. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ATmega32u4-Breakout without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k