Choc v1 socket reversible

TL605267·my_split_keyboard·hardware/choc_v1_socket_reversible/choc_v1_socket_reversible.kicad_pcb

Choc v1 socket reversible PCB layout, top view — open source RISC-V board by TL605267

About the Choc v1 socket reversible PCB

Choc v1 socket reversible is an open source RISC-V PCB design by TL605267, published on GitHub under the MIT license. It is a 2-layer board measuring 143.8 × 103.6 mm, with 74 components from 9 distinct parts.

Its main chip is the CH582, from the RISC-V family. By type, the board carries 26 switches, 26 LEDs, 13 diodes, 2 resistors and 1 IC.

It belongs with the keyboards designs in this gallery.

From the project

My first split keyboard design using CH582F MCU. Key position is based on sofle

Main components on the Choc v1 socket reversible

CH582

Choc v1 socket reversible bill of materials (BOM)

74 components, 9 distinct parts.

QtyPartRefs
1
CH582
U1
2
Conn_02x12_Odd_Even_MountingPin
J_LEFT1, J_RIGHT1
2
R_Pack08
RN_LEFT1, RN_RIGHT1
2
74HC165
SR_LEFT1, SR_RIGHT1
26
SW_Push
SW00, SW01, SW02, SW03, SW04, SW05, SW10, SW11 +18
26
SK6812MINI
LED00, LED01, LED02, LED03, LED04, LED05, LED10, LED11 +18
13
BAV70
D0001, D0203, D0405, D1011, D1213, D1415, D2021, D2223 +5
1
10kOhm
R1
1
500Ohm
R2

Choc v1 socket reversible design files

The KiCad project lives in the TL605267/my_split_keyboard repository on GitHub; these links point at the commit this page was built from.

Choc v1 socket reversible: common questions

What microcontroller does the Choc v1 socket reversible use?

The Choc v1 socket reversible is built around the CH582, from the RISC-V family.

How big is the Choc v1 socket reversible PCB?

The Choc v1 socket reversible measures 143.8 × 103.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Choc v1 socket reversible?

74 components, from 9 distinct parts. The full bill of materials is listed on this page.

Where can I download the Choc v1 socket reversible design files?

From the TL605267/my_split_keyboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Choc v1 socket reversible design in my own project?

Yes, under the terms of its MIT license, which TL605267 chose for the repository.

Can I test firmware for the Choc v1 socket reversible without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.

More boards in my_split_keyboard

Similar boards