Choc v1 socket reversible 165 595
TL605267·my_split_keyboard·hardware/choc_v1_socket_reversible_165_595/choc_v1_socket_reversible_165_595.kicad_pcb
About the Choc v1 socket reversible 165 595 PCB
Choc v1 socket reversible 165 595 is an open source RISC-V PCB design by TL605267, published on GitHub under the MIT license. It is a 2-layer board measuring 3.4 × 3 mm, with 82 components from 9 distinct parts.
Its main chip is the CH582, from the RISC-V family. By type, the board carries 26 switches, 26 LEDs, 7 diodes, 2 resistors and 1 IC.
It belongs with the keyboards designs in this gallery.
From the project
My first split keyboard design using CH582F MCU. Key position is based on sofle
Main components on the Choc v1 socket reversible 165 595
Choc v1 socket reversible 165 595 bill of materials (BOM)
82 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH582 | DIP-24_W15.24mm | U1 |
| 2 | FPC11-X1.0-12AH2.5 | FPC-SMD_12P-P1.00_XYECONN_FPC10-S1.0-12AH2.5 | J_LEFT1, J_RIGHT1 |
| 16 | R_US | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R_L0, R_L1, R_L2, R_L3, R_L4, R_L5, R_L6, R_L7 +8 |
| 2 | 74HC165 | SOP-16_3.9x9.9mm_P1.27mm | SR_LEFT1, SR_RIGHT1 |
| 26 | SW_Push | Kailh_socket_PG1350_reversible | SW00, SW01, SW02, SW03, SW04, SW05, SW10, SW11 +18 |
| 26 | SK6812MINI | LED_SK6812MINI_E_REVERSIBLE | LED00, LED01, LED02, LED03, LED04, LED05, LED10, LED11 +18 |
| 7 | BAW56DW | BAW70DW_reversible | D0, D1, D2, D3, D4, D5, D6 |
| 1 | 10kOhm | R_0805_2012Metric | R1 |
| 1 | 500Ohm | R_0805_2012Metric | R2 |
Choc v1 socket reversible 165 595 design files
The KiCad project lives in the TL605267/my_split_keyboard repository on GitHub; these links point at the commit this page was built from.
Choc v1 socket reversible 165 595: common questions
What microcontroller does the Choc v1 socket reversible 165 595 use?
The Choc v1 socket reversible 165 595 is built around the CH582, from the RISC-V family.
How big is the Choc v1 socket reversible 165 595 PCB?
The Choc v1 socket reversible 165 595 measures 3.4 × 3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Choc v1 socket reversible 165 595?
82 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Choc v1 socket reversible 165 595 design files?
From the TL605267/my_split_keyboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Choc v1 socket reversible 165 595 design in my own project?
Yes, under the terms of its MIT license, which TL605267 chose for the repository.
Can I test firmware for the Choc v1 socket reversible 165 595 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
More boards in my_split_keyboard
Similar boards
RISC-V
Audio
byrantech
27.8 × 22.3 mm38 parts2LMIT4.3kRISC-V
Keybit
notaroomba
19.1 × 19.1 mm19 parts2LNo license438RISC-V
Workbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0212RISC-V
Froggyswadge
cnlohr
81.5 × 72.2 mm92 parts2LMIT105RISC-V
Keytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105RISC-V
Ch32v003f4u6 with wsled
cnlohr
40.6 × 44.5 mm26 parts2LMIT105