16 open source boards using the FT234XD
Real designs built with the FT234XD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PIC
QI Charger
drewsum
150 × 50 mm293 parts2LNo license20PIC
MTouch Test
drewsum
65.1 × 43.9 mm88 parts2LNo license2PIC
VFD Clock
drewsum
200 × 50 mm458 parts2LNo license1STM32
USB C PD
JBeeBK
60 × 64.9 mm78 parts4LNo license1PIC
Nixie Clock
drewsum
200 × 50 mm322 parts4LNo license0STM32
Robo con for-Wi-Fi
tmcit-ararobo-2026a
86 × 62 mm101 parts4LMIT0Jetson interface board
tmcit-ararobo-2026a
63 × 23 mm33 parts2LMIT0M18-usb interface
fred314159265
33 × 46 mm29 parts2LUnlicense0Xsens USB Converter Replica
Forestry-Robotics-UC
38.2 × 16.5 mm26 parts2LNo license0Nordic nRF
NRF52811 USB
alvarop
41.8 × 14.8 mm42 parts4LMIT21STM32
Baset1-media converter
azonenberg
100.5 × 62.5 mm173 parts4LBSD-3-Clause17ARCH
Terrapin-Rocket-Team
65 × 30 mm64 parts4LNo license17TI MSP430/CC
Servos
cactorium
40.4 × 54.2 mm18 parts2LMIT0Nordic nRF
NRF52811 USB LoRa
alvarop
31 × 19 mm34 parts2LMIT21NXP
Live video multi function board
Terrapin-Rocket-Team
85 × 56 mm59 parts4LNo license17NXP
Ground receiver
Terrapin-Rocket-Team
61.6 × 92.3 mm56 parts4LNo license17
How designs wire the FT234XD
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the FT234XD connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 13 of 13 designs, most often 100 nF (then 4.7 µF).
- The USBDM pin has a series resistor on 11 of 13 designs, most often 27 Ω (then 22 Ω).
- The RESET pin has a capacitor to GND on 11 of 13 designs, most often 100 nF (then 4.7 µF).
- The VCCIO pin has a decoupling capacitor on 11 of 13 designs, most often 100 nF (then 470 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| USBDMpin 1 | Connected to: Signal 100% |
|
| RESETpin 2 | Connected to: Signal 62% · 3.3V 31% |
|
| VCCpin 4 | Connected to: 5V 85% · a signal 15% |
|
| GNDpin 5, 13 | Connected to: GND 100% | — |
| RTS/D2pin 8 | Connected to: Not connected 85% · a signal 15% | — |
| VCCIOpin 9 | Connected to: 3.3V 77% · a signal 15% |
|
| RXDpin 10 | Connected to: The microcontroller 38%, ISO7321C 23% |
|
| CTS/D3pin 11 | Connected to: Not connected 77% · a signal 15% | — |
| USBDPpin 12 | Connected to: Signal 100% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include NRF52811 USB by alvarop, QI Charger by drewsum, Baset1-media converter by azonenberg and ARCH by Terrapin-Rocket-Team.
The FT234XD in open source designs
The gallery holds 16 open source boards using the FT234XD from 13 GitHub repositories; a typical one measures about 64 × 50 mm and carries around 62 components.
50% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.
The most starred is NRF52811 USB by alvarop.
Parts used alongside the FT234XD
Microcontrollers on boards using the FT234XD
What boards using the FT234XD are built for
FT234XD: common questions
Where can I find a FT234XD reference design?
Each of the 16 boards on this page is a real design using the FT234XD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the FT234XD VCC pin?
The VCC pin has a decoupling capacitor on 13 of 13 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 13 open source designs using the FT234XD.
What resistor goes on the FT234XD USBDM pin?
The USBDM pin has a series resistor on 11 of 13 designs, most often 27 Ω (then 22 Ω). Counted from the KiCad layouts of 13 open source designs using the FT234XD.
How is the FT234XD RESET pin connected?
The RESET pin has a capacitor to GND on 11 of 13 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 13 open source designs using the FT234XD.
What parts are used alongside the FT234XD?
The TPD3S014DBVR, ISO7321C, 74LVC1G17, 74LVC1G97 and 74VHC541 appear in the most repositories here.
Which microcontrollers do boards using the FT234XD use?
Most are built on PIC (4), STM32 (3), Nordic nRF (2) and NXP (2).
How big is a typical board using the FT234XD?
The median is 64 × 50 mm, and 50% are two-layer designs.
What is the most popular open source board using the FT234XD?
By GitHub stars, NRF52811 USB by alvarop, with 21 stars.
Can I simulate one of these boards using the FT234XD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.