Research-Motor-Tests-2025

TMIT-Avionics·Research-Motor-Tests-2025·pcb/FireSide/FireSide.kicad_pcb

Research-Motor-Tests-2025 PCB layout, top view — open source board by TMIT-Avionics

About the Research-Motor-Tests-2025 PCB

Research-Motor-Tests-2025 is an open source PCB design by TMIT-Avionics, published on GitHub under the MIT license. It is a 2-layer board measuring 84 × 122 mm, with 38 components from 18 distinct parts.

Other key parts include the MIC5209-5YS, NUCLEO-L412KB and MIC5209-3.3YS. By type, the board carries 14 connectors, 8 ICs, 7 resistors, 6 capacitors, 2 test points and 1 transistor.

It belongs with the rf & radio and usb & debug tools designs in this gallery.

From the project

Repository for all codes and files related to research motor tests conducted by thrustMIT in the month of March and April 2025

- Upto 6 parallel >3 kHz channels logging using 12-bit ADC with a circular buffer - Binary logging to SD card with onboard CSV conversion utility - Reyax RYLR LoRa‑based command, debugging, and telemetry exchange - MOSFET D4184 module‑based ignition control with safety interlocks - Deterministic, debugger ready, and reliable state‑machine‑driven operation

This architecture aims to improve fault detection, reliability, and repeatability. The architecture is inspired by ECSS requirements on space operations software and commercial electronic components.

Main components on the Research-Motor-Tests-2025

Research-Motor-Tests-2025 bill of materials (BOM)

38 components, 18 distinct parts.

QtyPartRefs
1
MIC5209-5YS
U1
1
~
U2
1
NUCLEO-L412KB
U3
3
~
U5, U6, U9
1
MIC5209-3.3YS
U7
1
~
U8
1
MMBT2222A
Q1
11
Conn_01x02_Pin
J1, J2, J4, J5, J6, J7, J8, J10 +3
1
Conn_01x08_Pin
J3
2
Screw_Terminal_01x03
J9, J13
2
TestPoint
TP1, TP2
2
0.1uF
C3, C7
2
22uF
C4, C8
1
100nF
C5
1
4.7uF
C6
2
1M
R1, R3
4
100k
R2, R5, R6, R7
1
1k
R4

Research-Motor-Tests-2025 design files

The KiCad project lives in the TMIT-Avionics/Research-Motor-Tests-2025 repository on GitHub; these links point at the commit this page was built from.

Research-Motor-Tests-2025: common questions

How big is the Research-Motor-Tests-2025 PCB?

The Research-Motor-Tests-2025 measures 84 × 122 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Research-Motor-Tests-2025?

38 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Research-Motor-Tests-2025 design files?

From the TMIT-Avionics/Research-Motor-Tests-2025 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Research-Motor-Tests-2025 design in my own project?

Yes, under the terms of its MIT license, which TMIT-Avionics chose for the repository.

Similar boards