Led chaser SMD
tmjnijssen·OSCD_demo_PCB·workshop/led_chaser_SMD/led_chaser_SMD.kicad_pcb
About the Led chaser SMD PCB
Led chaser SMD is an open source PCB design by tmjnijssen, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 24 × 35 mm, with 25 components from 11 distinct parts.
Other key parts include the NE555 and 4017. By type, the board carries 11 diodes, 5 capacitors, 4 resistors, 2 ICs, 1 connector and 1 switch.
It belongs with the sensors, iot & wireless and wearables designs in this gallery.
From the project
Open Science Community Delft demonstration PCB
A demonstration / teaching PCB built by the Open Science Community Delft to show what an open hardware project looks like in practice: full sources, an open licence, and everything needed to have the board made and reprogrammed by anyone.
It is a round, ~93 mm ESP32-C3 board shaped like the OSCD logo, with a ring of 12 addressable RGB LEDs, three sensors on a shared I²C bus, capacitive touch pads, and three push buttons. Plug it into USB-C, and the demo firmware lights the ring in response to tilt, touch, ambient light, and button presses.
Main components on the Led chaser SMD
Led chaser SMD bill of materials (BOM)
25 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NE555 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | 4017 | SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | Conn_01x02 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | 100K 100k | Potentiometer_Bourns_TC33X_Vertical | RV1 |
| 1 | C600988 ENABLE | SW_DIP_SPSTx01_Slide_6.7x4.1mm_W8.61mm_P2.54mm_LowProfile | SW1 |
| 10 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8 +2 |
| 1 | 1N5819 | D_SOD-323 | D11 |
| 2 | 10UF 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C5 |
| 3 | 10NF 10nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4 |
| 2 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R4 |
| 2 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
Led chaser SMD design files
The KiCad project lives in the tmjnijssen/OSCD_demo_PCB repository on GitHub; these links point at the commit this page was built from.
Led chaser SMD: common questions
How big is the Led chaser SMD PCB?
The Led chaser SMD measures 24 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Led chaser SMD?
25 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Led chaser SMD design files?
From the tmjnijssen/OSCD_demo_PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Led chaser SMD design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which tmjnijssen chose for the repository.
More boards in OSCD_demo_PCB
Similar boards
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kBM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k