Agent andon light

toadish-frog·agent-andon-light·device/hardware/pcb/andon_light_strip.kicad_pcb

Agent andon light PCB layout, top view — open source RP2040/RP2350 board by toadish-frog

About the Agent andon light PCB

Agent andon light is an open source RP2040/RP2350 PCB design by toadish-frog, published on GitHub under the MIT license. It is a 2-layer board measuring 104.1 × 21.8 mm, with 23 components from 5 distinct parts.

Its main chip is the 20187, from the RP2040/RP2350 family. By type, the board carries 11 capacitors, 10 diodes and 1 resistor.

It belongs with the displays & leds designs in this gallery.

From the project

Physical desktop status light for Claude Code and Codex CLI. An RP2040 + WS2812B LED strip shows agent state at a glance (green: working, yellow: waiting on you, red: idle), driven by agent hooks through a Python CLI.

A physical desktop status light and vibe coding companion for Claude Code / CLI coding agents — so you can walk away while an agent works and still know its state at a glance, instead of staring at a terminal.

This doc covers "I already have the hardware, how do I get it running." Building the hardware from scratch starts at device/docs/USER-GUIDE.md.

- The assembled device — a Waveshare RP2040-Zero hand-soldered onto the custom PCB, pre-flashed with firmware. Building one from scratch instead? Start at device/docs/USER-GUIDE.md, not here. - A data-capable USB-C cable. - Python 3 — Linux…

Agent andon light, from the project README
From the project README

Agent andon light bill of materials (BOM)

23 components, 5 distinct parts.

QtyPartRefs
1
20187
Waveshare RP2040 Zero
Waveshare
WS-RP2040-Zero1
10
WS2812B-2020-V6
WS2812B-2020
worldsemi
D1, D2, D3, D4, D5, D6, D7, D8 +2
1
JVJ16V470M6x8
470uF
JIERR
C1
10
CL05B104KB54PNC
100nF
Samsung
C2, C3, C4, C5, C6, C7, C8, C9 +2
1
RC0805FR-07330RL
330
YAGEO
R1

Agent andon light design files

The KiCad project lives in the toadish-frog/agent-andon-light repository on GitHub; these links point at the commit this page was built from.

Agent andon light: common questions

What microcontroller does the Agent andon light use?

The Agent andon light is built around the 20187, from the RP2040/RP2350 family.

How big is the Agent andon light PCB?

The Agent andon light measures 104.1 × 21.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Agent andon light?

23 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Agent andon light design files?

From the toadish-frog/agent-andon-light repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Agent andon light design in my own project?

Yes, under the terms of its MIT license, which toadish-frog chose for the repository.

Can I test firmware for the Agent andon light without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards