2nd
Tobias66662·SPRO3---PCB-Design-·2nd PCB/2nd PCB.kicad_pcb
About the 2nd PCB
2nd is an open source PCB design by Tobias66662, published on GitHub. It is a 2-layer board measuring 50 × 40 mm, with 16 components from 15 distinct parts.
Other key parts include the ACS712xLCTR-05B and L7805. By type, the board carries 6 connectors, 5 capacitors, 2 ICs, 1 transistor, 1 diode and 1 resistor.
Main components on the 2nd
2nd bill of materials (BOM)
16 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ACS712xLCTR-05B | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | L7805 | TO-220-3_Vertical | U2 |
| 1 | NMOS | TO-220-3_Vertical | Q1 |
| 1 | Battery | TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | ADC PIN | PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | PWM PIN | PinHeader_1x01_P2.54mm_Vertical | J3 |
| 1 | DC Moter (Brushes) | TerminalBlock_bornier-2_P5.08mm | J4 |
| 1 | L298N Module | TerminalBlock_bornier-2_P5.08mm | J5 |
| 1 | Sensor/Main PCB | TerminalBlock_bornier-2_P5.08mm | J6 |
| 1 | 1N4001 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 10uF | CP_Radial_D5.0mm_P2.50mm | C1 |
| 2 | 0.1uF | CP_Radial_D5.0mm_P2.50mm | C2, C5 |
| 1 | 1nF | C_Disc_D3.0mm_W2.0mm_P2.50mm | C3 |
| 1 | 0.33uF | CP_Radial_D5.0mm_P2.50mm | C4 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
2nd design files
The KiCad project lives in the Tobias66662/SPRO3---PCB-Design- repository on GitHub; these links point at the commit this page was built from.
- Layout2nd PCB/2nd PCB.kicad_pcb
- Schematic2nd PCB/2nd PCB.kicad_sch
2nd: common questions
How big is the 2nd PCB?
The 2nd measures 50 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 2nd?
16 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the 2nd design files?
From the Tobias66662/SPRO3---PCB-Design- repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 2nd design in my own project?
The repository has no license, so all rights stay with Tobias66662. Use it as a reference, and ask the author before reusing the design.