Main

Tobias66662·SPRO3---PCB-Design-·Main PCB/Main PCB.kicad_pcb

Main PCB layout, top view — open source AVR/Arduino board by Tobias66662

About the Main PCB

Main is an open source AVR/Arduino PCB design by Tobias66662, published on GitHub. It is a 2-layer board measuring 100 × 70 mm, with 42 components from 27 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the CA3140 and CD4051B. By type, the board carries 17 connectors, 12 capacitors, 7 resistors, 2 ICs, 1 module and 1 switch.

Main components on the Main

Main bill of materials (BOM)

42 components, 27 distinct parts.

QtyPartRefs
1
CA3140
U1
1
CD4051B
U2
1
Arduino_Nano_v3.x
A1
1
Power Input
J1
1
2nd PCB
J2
1
Servo Motor
J3
1
L298N Module
J4
1
Gate Sensor
J5
1
Magnometer
J6
1
Conn_01x05_Pin
J7
8
Conn_01x03_Pin
J8, J9, J10, J11, J12, J13, J14, J15
1
Spare I2C PINS
J16
1
Trigger Pin (backup)
J17
1
SW_SPDT
SW1
1
Thermistor_NTC
TH1
1
LED
D2
2
10nF
C1, C12
1
10uF
C2
1
1uF
C3
7
0.1uF
C5, C6, C7, C8, C9, C10, C11
Show 7 more
QtyPartRefs
1
10uF
C13
1
11k
R1
2
3k
R2, R3
1
150
R4
1
1.5k
R5
1
20
R6
1
100
R7

Main design files

The KiCad project lives in the Tobias66662/SPRO3---PCB-Design- repository on GitHub; these links point at the commit this page was built from.

Main: common questions

What microcontroller does the Main use?

The Main is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the Main PCB?

The Main measures 100 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Main?

42 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the Main design files?

From the Tobias66662/SPRO3---PCB-Design- repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Main design in my own project?

The repository has no license, so all rights stay with Tobias66662. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Main without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in SPRO3---PCB-Design-

Similar boards