${PROJECT}
tobigun·EavesDrum·schematics/hihat/hihat.kicad_pcb
About the ${PROJECT} PCB
${PROJECT} is an open source PCB design by tobigun, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 45.5 × 21 mm, with 5 components from 5 distinct parts.
Other key parts include the TCRT5000. By type, the board carries 3 resistors, 1 IC and 1 connector.
It belongs with the audio and wearables designs in this gallery.
From the project
EavesDrum is an e-drum trigger module project, designed for musicians and makers. It allows you to connect drum pads or piezo triggers and converts their signals into MIDI events.
- Welcome to EavesDrum! - Downloads - EavesDrum Trigger Module - Features - Before You Start: Is EavesDrum What You Need? - Getting Started - Build Your Own EavesDrum Trigger Module - Use the Reference Design - PCB Ordering and Assembly - Connector Harness - Connector Module - Build your own adapter - Wiring the Single Pad Connectors - Make Your Own Design - How the Circuit Works - Over-Voltage Protection - Voltage Divider / DC Voltage Offset Generator - Example - Configuration - Calibration - Settings - Generic Settings - Pedal Settings - Apply Presets - Mappings - Apply a Whole…

Main components on the ${PROJECT}
${PROJECT} bill of materials (BOM)
5 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TCRT5000 | tcrt5000 | U1 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | 5k | Potentiometer_ACP_CA9-VSMD_Vertical | R1 |
| 1 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
${PROJECT} design files
The KiCad project lives in the tobigun/EavesDrum repository on GitHub; these links point at the commit this page was built from.
${PROJECT}: common questions
How big is the ${PROJECT} PCB?
The ${PROJECT} measures 45.5 × 21 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ${PROJECT}?
5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ${PROJECT} design files?
From the tobigun/EavesDrum repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ${PROJECT} design in my own project?
Yes, under the terms of its GPL-3.0 license, which tobigun chose for the repository.
More boards in EavesDrum
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k