EavesDrum

tobigun·EavesDrum·schematics/module/eavesdrum-module.kicad_pcb

EavesDrum PCB layout, top view — open source Raspberry Pi board by tobigun

About the EavesDrum PCB

EavesDrum is an open source Raspberry Pi PCB design by tobigun, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 100 × 100 mm, with 94 components from 23 distinct parts.

Its main chip is the RaspberryPi_Pico_wo_2nd_pin_row, from the Raspberry Pi family. Other key parts include the CD74HC4067M. By type, the board carries 46 resistors, 35 diodes, 6 connectors, 3 switches, 2 ICs and 2 capacitors.

It belongs with the audio and wearables designs in this gallery.

From the project

EavesDrum is an e-drum trigger module project, designed for musicians and makers. It allows you to connect drum pads or piezo triggers and converts their signals into MIDI events.

- Welcome to EavesDrum! - Downloads - EavesDrum Trigger Module - Features - Before You Start: Is EavesDrum What You Need? - Getting Started - Build Your Own EavesDrum Trigger Module - Use the Reference Design - PCB Ordering and Assembly - Connector Harness - Connector Module - Build your own adapter - Wiring the Single Pad Connectors - Make Your Own Design - How the Circuit Works - Over-Voltage Protection - Voltage Divider / DC Voltage Offset Generator - Example - Configuration - Calibration - Settings - Generic Settings - Pedal Settings - Apply Presets - Mappings - Apply a Whole…

EavesDrum, from the project README
From the project README

Main components on the EavesDrum

EavesDrum bill of materials (BOM)

94 components, 23 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
CD74HC4067M
U1, U2
1
USB_A
J1
1
Conn_02x25_Odd_Even
J2
1
Conn_01x03
J3
1
Conn_01x20_Socket
J4
1
Conn_01x20_Socket
J5
1
DIN-5_180degree
J7
3
SW_Push
SW1, SW2, SW3
32
BAT54S
D1.0, D1.1, D1.2, D1.3, D1.4, D1.5, D1.6, D1.7 +24
1
LED (red)
D3
1
LED (white/blue)
D4
1
LED (yellow)
D5
2
10u
C1, C2
32
1k
R1.0, R1.1, R1.2, R1.3, R1.4, R1.5, R1.6, R1.7 +24
2
5k
R3, R6
1
2.7k
R4
3
330
R5, R8, R13
2
4.7k
R9, R14
1
10k
R10
1
100k
R11
Show 3 more
QtyPartRefs
2
15k
R15, R16
1
10
R17
1
33
R18

EavesDrum design files

The KiCad project lives in the tobigun/EavesDrum repository on GitHub; these links point at the commit this page was built from.

EavesDrum: common questions

What microcontroller does the EavesDrum use?

The EavesDrum is built around the RaspberryPi_Pico_wo_2nd_pin_row, from the Raspberry Pi family.

How big is the EavesDrum PCB?

The EavesDrum measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the EavesDrum?

94 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the EavesDrum design files?

From the tobigun/EavesDrum repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the EavesDrum design in my own project?

Yes, under the terms of its GPL-3.0 license, which tobigun chose for the repository.

Can I test firmware for the EavesDrum without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in EavesDrum

Similar boards