BranchAdapter
About the BranchAdapter PCB
BranchAdapter is an open source PCB design by tokai-student-rocket-project, published on GitHub under the MIT license. It is a 2-layer board measuring 93 × 32 mm, with 16 components from 7 distinct parts.
By type, the board carries 8 connectors and 8 test points.
From the project
第6世代自動GSE電装系
2025年3月8日，H-60号機打上げ実験にて運用をし正常に動作したことを確認しました．
platform.iniはPlatformIOを使用するための設定ファイルです．外部ライブラリがインストールされていなくてもこのplatform.iniファイルに記載があれば自動的にインストールしてくるため環境構築を行いやすくなり，とても便利です．参照：公式
platform.iniファイルにはセクションがあり，それぞれに対してKeyとValueのペアがあります．
platform = atmelavr > 使用するマイコンに合わせています．参照：公式
board = ATmega2560 > 使用するマイコンが持つ固有の値を入れています．参照：公式
framework = arduino > 使用したいフレームワークを指定しています．参照：公式
BranchAdapter bill of materials (BOM)
16 components, 7 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | Conn_01x02 | DF51A-2P-2DSA(01) | J1, J2, J5, J6, J7 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P Conn_01x02 | DF51A-2P-2DSA(01) | J3 |
| 1 | CONN_PANEL_BAORD_1 Conn_01x02 | DF51A-2P-2DSA(01) | J9 |
| 1 | CONN_PANEL_BAORD_2 Conn_01x10 | DF51A-10DP-2DS(20) | J10 |
| 6 | TestPoint | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1, TP5, TP6, TP7, TP8, TP9 |
| 1 | TP_12V TestPoint | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP2 |
| 1 | TP_5V TestPoint | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP3 |
BranchAdapter design files
The KiCad project lives in the tokai-student-rocket-project/Gen6-GSE-Elec repository on GitHub; these links point at the commit this page was built from.
BranchAdapter: common questions
How big is the BranchAdapter PCB?
The BranchAdapter measures 93 × 32 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BranchAdapter?
16 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BranchAdapter design files?
From the tokai-student-rocket-project/Gen6-GSE-Elec repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the BranchAdapter design in my own project?
Yes, under the terms of its MIT license, which tokai-student-rocket-project chose for the repository.
More boards in Gen6-GSE-Elec
AVR/ArduinoSatelliteController2.0
150 × 100 mm221 parts2LMIT2
AVR/ArduinoSatelliteController
150 × 100 mm185 parts2LMIT2
AVR/ArduinoLaunchController2.0
150 × 100 mm180 parts2LMIT2
AVR/ArduinoLaunchController
150 × 100 mm153 parts2LMIT2
STM32THRValveControlModule
99 × 75 mm52 parts2LMIT2
AVR/ArduinoStatusPanel
121 × 92 mm36 parts2LMIT2
ESP32SatelliteNode
80 × 60 mm29 parts2LMIT2
SatelliteNode-Switch
30 × 30 mm7 parts2LMIT2