HardLabs

StatusPanel

tokai-student-rocket-project·Gen6-GSE-Elec·KiCad/StatusPanel/StatusPanel.kicad_pcb

StatusPanel PCB layout, top view — open source AVR/Arduino board by tokai-student-rocket-project
Simulate this board

About the StatusPanel PCB

StatusPanel is an open source AVR/Arduino PCB design by tokai-student-rocket-project, published on GitHub under the MIT license. It is a 2-layer board measuring 121 × 92 mm, with 36 components from 29 distinct parts.

Its main chip is the ATMEGA2560-16A, from the AVR/Arduino family. Other key parts include the FT232RNL. By type, the board carries 21 connectors, 9 resistors, 4 capacitors and 2 ICs.

From the project

第6世代自動GSE電装系

2025年3月8日，H-60号機打上げ実験にて運用をし正常に動作したことを確認しました．

platform.iniはPlatformIOを使用するための設定ファイルです．外部ライブラリがインストールされていなくてもこのplatform.iniファイルに記載があれば自動的にインストールしてくるため環境構築を行いやすくなり，とても便利です．参照：公式

platform.iniファイルにはセクションがあり，それぞれに対してKeyとValueのペアがあります．

platform = atmelavr > 使用するマイコンに合わせています．参照：公式

board = ATmega2560 > 使用するマイコンが持つ固有の値を入れています．参照：公式

framework = arduino > 使用したいフレームワークを指定しています．参照：公式

StatusPanel, from the project README
From the project README

Main components on the StatusPanel

ATMEGA2560-16AFT232RNL

StatusPanel bill of materials (BOM)

36 components, 29 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATMEGA2560-16A
2281SB
U1
1
FT232RNL
TM1637
U2
1
CONN
J1
1
CONN_RESET_CTL
J2
1
USB_C_RECEPTACLE_USB2.0_16P
CONN_RESET_GND
J3
1
CONN_USB_5V
J4
1
CONN_USB_CTL
J5
1
CONN_INPUT_CTL
J6
1
CONN_INPUT_GND
J7
1
CONN_BOARD_3
CONN_RS485_CTL
J8
1
CONN_PANEL_BAORD_1
CONN_RS485_GND
J9
1
CONN_PANEL_BAORD_2
CONN_12V_CTL
J10
1
CONN_12V_GND
J11
1
CONN_TASK_CTL
J12
1
CONN_RS485
CONN_TASK_GND
J13
1
CONN_5V_CTL
J14
1
CONN_5V_GND
J15
1
CONN_COM_CTL
J16
1
CONN_COM_GND
J17
1
CONN_LOW_CTL
J18
Show 9 more
QtyPartRefs
1
CONN_LOW_GND
J19
1
CONN_ERROR_CTL
J20
1
CONN_ERROR_GND
J21
2
15PF
0.1uF
C1, C2
1
0.1UF
0.1uF
C3
1
0.1UF
100uF
C4
5
1KR
270R
R1, R2, R5, R6, R9
3
10KR
270R
R3, R7, R8
1
1MR
270R
R4

StatusPanel design files

The KiCad project lives in the tokai-student-rocket-project/Gen6-GSE-Elec repository on GitHub; these links point at the commit this page was built from.

StatusPanel: common questions

What microcontroller does the StatusPanel use?

The StatusPanel is built around the ATMEGA2560-16A, from the AVR/Arduino family.

How big is the StatusPanel PCB?

The StatusPanel measures 121 × 92 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the StatusPanel?

36 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the StatusPanel design files?

From the tokai-student-rocket-project/Gen6-GSE-Elec repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the StatusPanel design in my own project?

Yes, under the terms of its MIT license, which tokai-student-rocket-project chose for the repository.

Can I test firmware for the StatusPanel without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in Gen6-GSE-Elec

Similar boards