SatelliteController
About the SatelliteController PCB
SatelliteController is an open source AVR/Arduino PCB design by tokai-student-rocket-project, published on GitHub under the MIT license. It is a 2-layer board measuring 150 × 100 mm, with 185 components from 83 distinct parts.
Its main chip is the ATMEGA2560-16A, from the AVR/Arduino family. Other key parts include the FT232RNL, USBLC6-2SC6, TPS2116DRL, NJM7805SDL1 and INA219BIDCNT. By type, the board carries 84 resistors, 35 diodes, 18 capacitors, 14 connectors, 13 transistors and 9 ICs.
It belongs with the rf & radio designs in this gallery.
From the project
第6世代自動GSE電装系
2025年3月8日，H-60号機打上げ実験にて運用をし正常に動作したことを確認しました．
platform.iniはPlatformIOを使用するための設定ファイルです．外部ライブラリがインストールされていなくてもこのplatform.iniファイルに記載があれば自動的にインストールしてくるため環境構築を行いやすくなり，とても便利です．参照：公式
platform.iniファイルにはセクションがあり，それぞれに対してKeyとValueのペアがあります．
platform = atmelavr > 使用するマイコンに合わせています．参照：公式
board = ATmega2560 > 使用するマイコンが持つ固有の値を入れています．参照：公式
framework = arduino > 使用したいフレームワークを指定しています．参照：公式
Main components on the SatelliteController
SatelliteController bill of materials (BOM)
185 components, 83 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATMEGA2560-16A ATMEGA2560-16AUR | TQFP-100_14x14mm_P0.5mm | U1 |
| 1 | FT232RNL FT232RL | SSOP-28_5.3x10.2mm_P0.65mm | U2 |
| 1 | USBLC6-2SC6 NJM7805SDL1 | TO-252-2 | U3 |
| 1 | TPS2116DRL INA219BIDCNT | SOT-23-8 | U4 |
| 1 | NJM7805SDL1 INA219BIDCNT | SOT-23-8 | U5 |
| 1 | INA219BIDCNT LTC485CN8#PBF | DIP-8_W7.62mm | U6 |
| 1 | INA219BIDCNT TLP785F | DIP-4_W10.16mm | U7 |
| 1 | TLP785F | DIP-4_W10.16mm | U8 |
| 1 | MCP3208 | DIP-16_W7.62mm | U9 |
| 2 | TJ8S06M3L | TO-252-2 | Q1, Q3 |
| 1 | 2SC3325-Y | SC-59_Handsoldering | Q2 |
| 10 | AO3400A | SOT-23 | Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11 +2 |
| 1 | HUSG-16.000-20 | Crystal_HC49-U_Vertical | Y1 |
| 1 | CONN_ICSP | PinSocket_1x06_P2.54mm_Vertical | J1 |
| 1 | CONN_USB | TB401-1-4-E | J2 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_B_Micro | USB_Micro-B_Wuerth_629105150521 | J3 |
| 1 | TO_CONVERTER | TB411-2-2-E-1 | J4 |
| 1 | FROM_CONVERTER | TB411-2-2-E-1 | J5 |
| 1 | DC_IN | TB411-2-2-E-1 | J6 |
| 1 | CONN_STATUS_PANEL | DF51A-14DP-2DS | J7 |
Show 63 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_BOARD_3 CONN_PANEL_BAORD_2 | DF51A-22DP-2DS | J8 |
| 1 | CONN_PANEL_BAORD_1 CONN_RS485 | TB401-1-4-E | J9 |
| 1 | CONN_PANEL_BAORD_2 CONN_N2O_PRESS | TB401-1-4-E | J10 |
| 1 | CONN_UMBILICAL | TB401-1-4-E | J11 |
| 1 | RELAY_POWER | TB411-2-2-E-1 | J12 |
| 1 | CONN_RS485 IGNITOR | TB411-2-2-E-1 | J13 |
| 1 | CONN_SORENOID_VALVE | DF51A-8DP-2DS | J14 |
| 1 | MF-NSMF050 | Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 3 | SW_Push | TVAF06-A020B-R | SW1, SW2, SW4 |
| 1 | SW_Push | PinHeader_1x02_P2.54mm_Vertical | SW3 |
| 1 | 10KR 10kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | TH1 |
| 1 | TP_INPUT | TestPoint_THTPad_D2.5mm_Drill1.2mm | TP1 |
| 1 | TP_12V | TestPoint_THTPad_D2.5mm_Drill1.2mm | TP2 |
| 1 | TP_5V | TestPoint_THTPad_D2.5mm_Drill1.2mm | TP3 |
| 1 | TP_GND | TestPoint_THTPad_D2.5mm_Drill1.2mm | TP4 |
| 2 | GS1010FL | D_SOD-123F | D1, D5 |
| 14 | LED_O | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D2, D9, D11, D12, D17, D18, D19, D20 +6 |
| 1 | GS1010FL SMAJ45A | D_SMA_Handsoldering | D3 |
| 1 | SMAJ45A | D_SMA_Handsoldering | D4 |
| 2 | SS2040FL | D_SOD-123F | D6, D7 |
| 2 | LED_B | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D8, D10 |
| 2 | LED_R | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D13, D15 |
| 2 | LED_G | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D14, D16 |
| 9 | GS1010FL | D_SOD-123F | D27, D28, D29, D30, D31, D32, D33, D34 +1 |
| 1 | 10UH 10uH | L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L1 |
| 2 | 15PF 15pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 9 | 0.1UF 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5, C6, C7, C8, C10, C11 +1 |
| 1 | 4.7UF 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9 |
| 1 | 0.1UF 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C12 |
| 1 | 1UF 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13 |
| 1 | 1UF 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C14 |
| 3 | 10UF 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C15, C17, C18 |
| 14 | 1KR 10kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R5, R14, R15, R16, R19, R20, R21 +6 |
| 1 | 1KR 1MR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 2 | 10KR 1kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R34 |
| 2 | 1MR 1kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R11 |
| 5 | 1KR 1kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R27, R29, R45, R47 |
| 2 | 10KR 10kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8 |
| 1 | 1KR 22R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 10KR 22R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 5.1KR 5.6kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | 5.1KR 3.3kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
| 2 | 1KR 0.1R2W | R_2816_7142Metric_Pad3.20x4.45mm_HandSolder | R17, R18 |
| 6 | 1KR 120R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R23, R49, R51, R55, R57, R59 |
| 1 | 1KR 240R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R24 |
| 2 | 1KR 300R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R25, R26 |
| 1 | 1KR 3.6kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R28 |
| 1 | 10KR 2.4kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R30 |
| 1 | 5.6KR 1kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R31 |
| 1 | 3.3KR 1kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R32 |
| 1 | 10KR 2.2kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R33 |
| 1 | 2.2kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R35 |
| 5 | 1kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R36, R38, R40, R41, R43 |
| 1 | 100R 1kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R37 |
| 2 | 0.1R2W 1kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R39, R42 |
| 1 | 120R 1kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R44 |
| 2 | 5.1KR 1kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R46, R48 |
| 3 | 1KR 56kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R53, R61, R63 |
| 3 | 1KR 33kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R54, R62, R64 |
| 5 | 56kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R65, R71, R73, R81, R83 |
| 5 | 33kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R66, R72, R74, R82, R84 |
| 5 | 120R | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R67, R69, R75, R77, R79 |
| 5 | 10kR | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R68, R70, R76, R78, R80 |
SatelliteController design files
The KiCad project lives in the tokai-student-rocket-project/Gen6-GSE-Elec repository on GitHub; these links point at the commit this page was built from.
SatelliteController: common questions
What microcontroller does the SatelliteController use?
The SatelliteController is built around the ATMEGA2560-16A, from the AVR/Arduino family.
How big is the SatelliteController PCB?
The SatelliteController measures 150 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SatelliteController?
185 components, from 83 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SatelliteController design files?
From the tokai-student-rocket-project/Gen6-GSE-Elec repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SatelliteController design in my own project?
Yes, under the terms of its MIT license, which tokai-student-rocket-project chose for the repository.
Can I test firmware for the SatelliteController without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in Gen6-GSE-Elec
AVR/ArduinoSatelliteController2.0
150 × 100 mm221 parts2LMIT2
AVR/ArduinoLaunchController2.0
150 × 100 mm180 parts2LMIT2
AVR/ArduinoLaunchController
150 × 100 mm153 parts2LMIT2
STM32THRValveControlModule
99 × 75 mm52 parts2LMIT2
AVR/ArduinoStatusPanel
121 × 92 mm36 parts2LMIT2
ESP32SatelliteNode
80 × 60 mm29 parts2LMIT2
BranchAdapter
93 × 32 mm16 parts2LMIT2
SatelliteNode-Switch
30 × 30 mm7 parts2LMIT2
Similar boards
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746
AVR/ArduinoEasyduino Atmega
68.8 × 53.6 mm35 parts4LCERN-OHL-P-2.0746
AVR/ArduinoUsbGpib
xyphro
54 × 15 mm21 parts2LMIT683
AVR/ArduinoLumberjack
peej
284.7 × 94.2 mm149 parts2LMIT402