Keyboard
TomasD-git·keyboard·FILES/KiCad/Old KiCad/new.kicad_pcb
About the Keyboard PCB
Keyboard is an open source RP2040/RP2350 PCB design by TomasD-git, published on GitHub. It is a 2-layer board measuring 308.8 × 142.8 mm, with 132 components from 13 distinct parts.
Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 65 switches, 65 diodes, 1 module and 1 connector.
It belongs with the keyboards designs in this gallery.
From the project
65 key keyboard with cherry mx switches
here u will find all of the kicad files and pictures will be here(scroll down there are more)
Explanation of each file KiCad new: uses new rp pico library so its more accurate
KiCad old: uses basic library for rp pico mainly used if u wanna see the project(should work same but the new is more accurate)
Keyboard: its a ready to use pcb design all packed in .zip file so it is avalible to put this file into PCB manufacturer, basiclly ready to use
Main components on the Keyboard
Keyboard bill of materials (BOM)
132 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RaspberryPi_Pico | RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | USB_C_Plug_USB2.0 | USB_C_Plug_JAE_DX07P024AJ1 | P1 |
| 2 | SW_PUSH_45DEG SW_Push_45deg | SW_Cherry_MX_1.00u_PCB | SW1, SW65 |
| 49 | SW_Push_45deg | SW_Cherry_MX_1.00u_PCB | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 +41 |
| 1 | SW_Push_45deg | SW_Cherry_MX_2.00u_PCB | SW14 |
| 1 | SW_Push_45deg | SW_Cherry_MX_1.50u_PCB | SW15 |
| 1 | SW_Push_45deg | SW_Cherry_MX_ISOEnter_PCB | SW28 |
| 1 | SW_Push_45deg | SW_Cherry_MX_1.75u_PCB | SW29 |
| 1 | SW_Push_45deg | SW_Cherry_MX_2.75u_PCB | SW41 |
| 8 | SW_Push_45deg | SW_Cherry_MX_1.25u_PCB | SW42, SW43, SW44, SW46, SW47, SW48, SW49, SW57 |
| 1 | SW_Push_45deg | SW_Cherry_MX_6.25u_PCB | SW45 |
| 64 | 1N4148WT | D_SOD-523 | D2, D3, D4, D5, D6, D7, D8, D9 +56 |
| 1 | 1N4148WT | D_SOD-523 | D65 |
Keyboard design files
The KiCad project lives in the TomasD-git/keyboard repository on GitHub; these links point at the commit this page was built from.
Keyboard: common questions
What microcontroller does the Keyboard use?
The Keyboard is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.
How big is the Keyboard PCB?
The Keyboard measures 308.8 × 142.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Keyboard?
132 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Keyboard design files?
From the TomasD-git/keyboard repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Keyboard design in my own project?
The repository has no license, so all rights stay with TomasD-git. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Keyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k