Keyboard-V2
TomasD-git·Keyboard-V2·PCB/Keyboard V2.kicad_pcb
About the Keyboard-V2 PCB
Keyboard-V2 is an open source RP2040/RP2350 PCB design by TomasD-git, published on GitHub under the MIT license. It is a 2-layer board measuring 293.5 × 134 mm, with 123 components from 10 distinct parts.
Its main chip is the Pico, from the RP2040/RP2350 family. By type, the board carries 61 switches, 61 diodes and 1 IC.
It belongs with the keyboards designs in this gallery.
From the project
small, compact keyboard for everyday use
Main components on the Keyboard-V2
Keyboard-V2 bill of materials (BOM)
123 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Pico | RPi_Pico_SMD_TH | U1 |
| 46 | SW_Push | SW_Cherry_MX_PCB_1.00u | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +38 |
| 1 | SW_Push | SW_Cherry_MX_2.00u_PCB | SW14 |
| 2 | SW_Push | SW_Cherry_MX_PCB_1.50u | SW15, SW28 |
| 1 | SW_Push | SW_Cherry_MX_PCB_1.75u | SW29 |
| 2 | SW_Push | SW_Cherry_MX_2.25u_PCB | SW41, SW42 |
| 1 | SW_Push | SW_Cherry_MX_2.75u_PCB | SW53 |
| 7 | SW_Push | SW_Cherry_MX_PCB_1.25u | SW54, SW55, SW56, SW58, SW59, SW60, SW61 |
| 1 | SW_Push | SW_Cherry_MX_6.25u_PCB | SW57 |
| 61 | 1N4148WT | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +53 |
Keyboard-V2 design files
The KiCad project lives in the TomasD-git/Keyboard-V2 repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Keyboard V2.kicad_pcb
- SchematicPCB/Keyboard V2.kicad_sch
- BOMPCB/production/bom.csv
Keyboard-V2: common questions
What microcontroller does the Keyboard-V2 use?
The Keyboard-V2 is built around the Pico, from the RP2040/RP2350 family.
How big is the Keyboard-V2 PCB?
The Keyboard-V2 measures 293.5 × 134 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Keyboard-V2?
123 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Keyboard-V2 design files?
From the TomasD-git/Keyboard-V2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Keyboard-V2 design in my own project?
Yes, under the terms of its MIT license, which TomasD-git chose for the repository.
Can I test firmware for the Keyboard-V2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k