USB-hub
TomasD-git·USB-hub·USB Hub PCB/USB Hub.kicad_pcb
About the USB-hub PCB
USB-hub is an open source PCB design by TomasD-git, published on GitHub under the MIT license. It is a 2-layer board measuring 56 × 38.2 mm, with 18 components from 10 distinct parts.
Other key parts include the CH334P and GT-USB-7004B. By type, the board carries 6 resistors, 5 capacitors, 4 ICs and 1 crystal.
It belongs with the usb & debug tools designs in this gallery.
From the project
USB hub, has 2x usbc, 2x usba, with usbc as host
Buy a PCBA or solder yourself with hot air station or hotplate, place the assembled pcb into case and use m2 screws to screw it into place.
Schematic PCB PCB (Back view) PCB (Front view) CAD (Back view) CAD (Front view)
Main components on the USB-hub
USB-hub bill of materials (BOM)
18 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH334P WCH(南京沁恒) | QFN-16_L3.0-W3.0-P0.50-BL-EP1.7 | U1 |
| 3 | GT-USB-7004B G-Switch(品赞) | USB-C-SMD_GT-USB-7004B | U2, U3, U4 |
| 1 | XC32M4-12.000-F10NNFT HCI(杭晶) | CRYSTAL-SMD_4P-L3.2-W2.5-BL | X1 |
| 2 | U-A-24DS-W-1 韩国韩荣 | USB-A-SMD_U-A-24DS-W-2 | USB1, USB2 |
| 2 | 1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3 |
| 1 | 100nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 10uF | C_1808_4520Metric_Pad1.72x2.30mm_HandSolder | C4 |
| 1 | 100uF | C_1808_4520Metric_Pad1.72x2.30mm_HandSolder | C5 |
| 4 | 56K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4 |
| 2 | 5.1K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R6 |
USB-hub design files
The KiCad project lives in the TomasD-git/USB-hub repository on GitHub; these links point at the commit this page was built from.
USB-hub: common questions
How big is the USB-hub PCB?
The USB-hub measures 56 × 38.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USB-hub?
18 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the USB-hub design files?
From the TomasD-git/USB-hub repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the USB-hub design in my own project?
Yes, under the terms of its MIT license, which TomasD-git chose for the repository.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389