ABZ-Security

tomik395·ABZ-Security·PCB Design/ece196-project-sketch.kicad_pcb

ABZ-Security PCB layout, top view — open source ESP32 board by tomik395

About the ABZ-Security PCB

ABZ-Security is an open source ESP32 PCB design by tomik395, published on GitHub. It is a 2-layer board measuring 94.5 × 46.1 mm, with 41 components from 30 distinct parts.

Its main chip is the ESP32-C3-MINI-1-N4, from the ESP32 family. By type, the board carries 2 LEDs, 1 connector and 1 battery holder.

It belongs with the power & battery and iot & wireless designs in this gallery.

From the project

ABZ Security Box is a standalone, single unit home alarm system. Battery operation, SMS communication, and shock proof design, the ABZ Security Box is a home-made method of ensuring safety with no monthly cost.

The ABZ Security Box is a security program created for ESP32-S3. This software is capable of measuring distances using a distance sensor, setting off an alarm if anything comes too close, and sending alerts via SMS. This program is specifically designed to be controlled remotely using SMS commands. The ABZ Security Box is meant to be mounted to a wall where an opening door would intersect the ultrasonic sensor line-of-sight.

ABZ-Security bill of materials (BOM)

41 components, 30 distinct parts.

QtyPartRefs
1
USB_C_Receptacle
J1
1
Battery_Cell1
BT1_18650
2
.1u
C_BOOT1, C_RST1
1
0.1u
C_BST1
1
.33u
C_BST2
1
680u
C_BST3
2
4.7u
C_CHRG1, C_CHRG2
2
10u
C_PWR1, C_PWR2
1
1u
C_PWR3
1
1N5821
D_BST1
1
MBR120VLSFT3G
D_PWR1
1
SP0503BAHT
ESD_ESP1
1
ESP32-C3-MINI-1-N4
ESP32-C3-MINI1
1
LM2577T-ADJ
IC_BST1
1
MCP73831-2-OT
IC_CHRG1
1
SPX3819M5-L-3-3
IC_PWR1
1
100u
L_BST1
1
RUF025N02TL
MOS_BST1
1
2.2k
R_BST1
1
17.4k
R_BST2
Show 10 more
QtyPartRefs
1
2k
R_BST3
2
2k
R_CHRG1, R_CHRG2
3
10k
R_ESP1, R_ESP2, R_RST1
2
100k
R_PWR1, R_USB3
1
1k
R_PWR2
2
5.1k
R_USB1, R_USB2
2
Conn_01x04_Pin
SPKR_BST1, USONIC1
2
SW_Push
SW_Boot1, SW_Reset1
1
Conn_01x02
SW_PWR1
2
LED
LED_CHRG1, LED__PWR1

ABZ-Security design files

The KiCad project lives in the tomik395/ABZ-Security repository on GitHub; these links point at the commit this page was built from.

ABZ-Security: common questions

What microcontroller does the ABZ-Security use?

The ABZ-Security is built around the ESP32-C3-MINI-1-N4, from the ESP32 family.

How big is the ABZ-Security PCB?

The ABZ-Security measures 94.5 × 46.1 mm, has 2 copper layers and is 1.599991 mm thick.

How many components are on the ABZ-Security?

41 components, from 30 distinct parts. The full bill of materials is listed on this page.

Where can I download the ABZ-Security design files?

From the tomik395/ABZ-Security repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ABZ-Security design in my own project?

The repository has no license, so all rights stay with tomik395. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ABZ-Security without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards