Pmod button
About the Pmod button PCB
Pmod button is an open source PCB design by TomKeddie, published on GitHub under the MIT license. It is a 2-layer board measuring 111.3 × 16.8 mm, with 19 components from 5 distinct parts.
By type, the board carries 9 resistors, 8 switches, 1 connector and 1 diode.
From the project
A collection of BSD licensed hardware designs for the PMOD form factor.
A collection of BSD licensed hardware designs for the PMOD form factor.
MIT licensed - see https://github.com/TomKeddie/prj-pmod/blob/master/LICENSE
This is a PMOD module with a SAMD21 cpu on it to make it easy to add an ARM cpu to an fpga project.
Hardware : https://github.com/TomKeddie/prj-pmod/tree/master/hardware/pmod-samd21
Bootloader : https://github.com/TomKeddie/prj-pmod/tree/master/software/pmod-samd21
Pmod button bill of materials (BOM)
19 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PMOD-2x6-MALE | PMOD_2X6_PTH_RA_PLUG | J1 |
| 8 | Switch_SW_Push | SW_Push_1P1T_NO_CK_PTS125Sx43PSMTR | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 8 | 10k | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 |
| 1 | 1k | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R9 |
Pmod button design files
The KiCad project lives in the TomKeddie/prj-pmod repository on GitHub; these links point at the commit this page was built from.
Pmod button: common questions
How big is the Pmod button PCB?
The Pmod button measures 111.3 × 16.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pmod button?
19 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pmod button design files?
From the TomKeddie/prj-pmod repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pmod button design in my own project?
Yes, under the terms of its MIT license, which TomKeddie chose for the repository.
More boards in prj-pmod
Pmod level conv-2
83 × 22.9 mm68 parts4LMIT7
Pmod usb analyser openvizla
31.2 × 41.2 mm33 parts2LMIT7
Microchip SAMPmod samd21-usbc
18.2 × 29 mm20 parts2LMIT7
Microchip SAMPmod samd21-usbu
18.2 × 29 mm18 parts2LMIT7
Microchip SAMPmod samd21-usbu pth
18.2 × 31.1 mm18 parts2LMIT7
Pmod ftdi
21.3 × 15.8 mm17 parts2LMIT7
Pmod fan5702
19 × 14.5 mm16 parts2LMIT7
Pmod-16x16led
37.5 × 43.3 mm13 partsMIT7
Pmod ulpi adapter
16.5 × 39.1 mm10 parts2LMIT7
Pmod swd
18.8 × 16.8 mm8 parts2LMIT7
Pmod sao
27 × 19 mm3 parts2LMIT7