Pmod fan5702
About the Pmod fan5702 PCB
Pmod fan5702 is an open source PCB design by TomKeddie, published on GitHub under the MIT license. It is a 2-layer board measuring 19 × 14.5 mm, with 16 components from 8 distinct parts.
Other key parts include the FAN5702UM. By type, the board carries 7 diodes, 5 capacitors, 2 resistors, 1 IC and 1 connector.
From the project
A collection of BSD licensed hardware designs for the PMOD form factor.
A collection of BSD licensed hardware designs for the PMOD form factor.
MIT licensed - see https://github.com/TomKeddie/prj-pmod/blob/master/LICENSE
This is a PMOD module with a SAMD21 cpu on it to make it easy to add an ARM cpu to an fpga project.
Hardware : https://github.com/TomKeddie/prj-pmod/tree/master/hardware/pmod-samd21
Bootloader : https://github.com/TomKeddie/prj-pmod/tree/master/software/pmod-samd21
Main components on the Pmod fan5702
Pmod fan5702 bill of materials (BOM)
16 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FAN5702UM | QFN-16-1EP_3x3mm_Pitch0.5mm_HS | U1 |
| 1 | PMOD-2x6-MALE | 2X6_SMD_RA_PLUG | J1 |
| 7 | LED | LED_1206_HandSoldering | D1, D2, D3, D4, D5, D6, D7 |
| 3 | 1uF | C_0805_HandSoldering | C1, C2, C5 |
| 1 | 10uF | C_0805_HandSoldering | C3 |
| 1 | 0.1uF | C_0805_HandSoldering | C4 |
| 1 | 220R | R_0805_HandSoldering | R1 |
| 1 | 10k | R_0805_HandSoldering | R2 |
Pmod fan5702 design files
The KiCad project lives in the TomKeddie/prj-pmod repository on GitHub; these links point at the commit this page was built from.
Pmod fan5702: common questions
How big is the Pmod fan5702 PCB?
The Pmod fan5702 measures 19 × 14.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pmod fan5702?
16 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pmod fan5702 design files?
From the TomKeddie/prj-pmod repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Pmod fan5702 design in my own project?
Yes, under the terms of its MIT license, which TomKeddie chose for the repository.
More boards in prj-pmod
Pmod level conv-2
83 × 22.9 mm68 parts4LMIT7
Pmod usb analyser openvizla
31.2 × 41.2 mm33 parts2LMIT7
Microchip SAMPmod samd21-usbc
18.2 × 29 mm20 parts2LMIT7
Pmod button
111.3 × 16.8 mm19 parts2LMIT7
Microchip SAMPmod samd21-usbu pth
18.2 × 31.1 mm18 parts2LMIT7
Microchip SAMPmod samd21-usbu
18.2 × 29 mm18 parts2LMIT7
Pmod ftdi
21.3 × 15.8 mm17 parts2LMIT7
Pmod-16x16led
37.5 × 43.3 mm13 partsMIT7
Pmod ulpi adapter
16.5 × 39.1 mm10 parts2LMIT7
Pmod swd
18.8 × 16.8 mm8 parts2LMIT7
Pmod sao
27 × 19 mm3 parts2LMIT7