HardLabs

Pmod samd21-usbu pth

TomKeddie·prj-pmod·hardware/pmod-samd21/pmod-samd21-usbu-pth/pmod-samd21-usbu-pth.kicad_pcb

Pmod samd21-usbu pth PCB layout, top view — open source Microchip SAM board by TomKeddie
Simulate this board

About the Pmod samd21-usbu pth PCB

Pmod samd21-usbu pth is an open source Microchip SAM PCB design by TomKeddie, published on GitHub under the MIT license. It is a 2-layer board measuring 18.2 × 31.1 mm, with 18 components from 14 distinct parts.

Its main chip is the ATSAMD21G-A, from the Microchip SAM family. By type, the board carries 7 capacitors, 4 connectors, 2 resistors, 1 IC, 1 transistor and 1 crystal.

From the project

All CPU power is derived from the PMOD power pins. The VBUS pin on the usb connector is connected only to a test point.

All CPU power is derived from the PMOD power pins. The VBUS pin on the usb connector is connected only to a test point.

\* SPI pins are as nominated, SAMD21 pin allocations allows many other combinations

\* SPI pins are as nominated, SAMD21 pin allocations allows many other combinations

Pmod samd21-usbu pth, from the project README
From the project README

Main components on the Pmod samd21-usbu pth

ATSAMD21G-A

Pmod samd21-usbu pth bill of materials (BOM)

18 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATSAMD21G-A
U1
1
2N7002PW
Q1
1
32.768kHz
Y1
1
PMOD-2x6-MALE
J1
1
PMOD-2x6-FEMALE
J2
1
USB_B_Micro
J3
1
CORTEX_DEBUGPTH
J4
1
SWITCH-MOMENTARY-2SMD
S1
1
LED
D1
4
0.1uF
C1, C2, C3, C4
2
6pF
C5, C6
1
1uF
C7
1
10K
R1
1
330
R2

Pmod samd21-usbu pth design files

The KiCad project lives in the TomKeddie/prj-pmod repository on GitHub; these links point at the commit this page was built from.

Pmod samd21-usbu pth: common questions

What microcontroller does the Pmod samd21-usbu pth use?

The Pmod samd21-usbu pth is built around the ATSAMD21G-A, from the Microchip SAM family.

How big is the Pmod samd21-usbu pth PCB?

The Pmod samd21-usbu pth measures 18.2 × 31.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pmod samd21-usbu pth?

18 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pmod samd21-usbu pth design files?

From the TomKeddie/prj-pmod repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Pmod samd21-usbu pth design in my own project?

Yes, under the terms of its MIT license, which TomKeddie chose for the repository.

Can I test firmware for the Pmod samd21-usbu pth without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.

More boards in prj-pmod

Similar boards