Simple midi controller
Tommie1236·simple-midi-controller·Kicad/simple-midi-controller.kicad_pcb
About the Simple midi controller PCB
Simple midi controller is an open source RP2040/RP2350 PCB design by Tommie1236, published on GitHub. It is a 2-layer board measuring 70 × 50 mm, with 9 components from 8 distinct parts.
Its main chip is the RP2040-Zero, from the RP2040/RP2350 family. Other key parts include the MAX7219. By type, the board carries 4 connectors, 2 ICs, 2 capacitors and 1 resistor.
It belongs with the audio designs in this gallery.
From the project
a simple 32 button midi controller with banks
32 configurable buttons Multiple banks for expanded control USB MIDI device class (works out-of-the-box with most DAWs and lighting control software) Example use: MyDMX, generic macropad for other MIDI-compatible software
Primary target: RP2040-Zero Any RP2040-based board can be used (adjust pin mappings as needed) Wiring and assembly instructions: TODO!!
Clone this repository and its dependencies. Build the firmware using the included build script in the root directory. Optionally use the -l flag to automaticly use picotool to load it to the device. Or reboot into bootsel mode and drag the…
Main components on the Simple midi controller
Simple midi controller bill of materials (BOM)
9 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX7219 | DIP-24_W7.62mm_Socket | U1 |
| 1 | ~ | RP2040-Zero | U2 |
| 1 | Conn_02x06_Odd_Even | PinHeader_2x06_P2.54mm_Vertical | J1 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_02x06_Odd_Even | PinHeader_2x05_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 2 | C | CP_Radial_D5.0mm_P2.50mm | C1, C2 |
| 1 | 150 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
Simple midi controller design files
The KiCad project lives in the Tommie1236/simple-midi-controller repository on GitHub; these links point at the commit this page was built from.
Simple midi controller: common questions
What microcontroller does the Simple midi controller use?
The Simple midi controller is built around the RP2040-Zero, from the RP2040/RP2350 family.
How big is the Simple midi controller PCB?
The Simple midi controller measures 70 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Simple midi controller?
9 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Simple midi controller design files?
From the Tommie1236/simple-midi-controller repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Simple midi controller design in my own project?
The repository has no license, so all rights stay with Tommie1236. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Simple midi controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k